XMC Motion Controller
XMC Motion Controller
The XMC-E32A/E32C delivers high performance EtherCAT-based motion control functions along with a variety of embedded functions and high-tech capabilities specialized for numerical control and robots. In addition to LS ELECTRIC PLC, HMI and servo products, the XMC-E32A/E32C will help you create an even better and optimal solution.
Features
ㆍHigh-speed program processing: 6.25ns (Basic command)
ㆍEtherCAT-based high speed cycle times: 0.5/1/2/4ms (Same as main task cycle time)
ㆍVarious built-in functions
- 8 digital inputs/16 digital outputs, Encoder inputs (2 ch.), Ethernet, Analog Input (2 ch.)/Output (2 ch.) E32A, RS-232C/RS-485_E32C
ㆍRobot control: Delta3, Delta3R, Linear Delta, etc.
ㆍXG5000 software for programming and monitoring
Specification
| Item | Specification | ||
|---|---|---|---|
| Operation method | Main task/Periodic task: Fixed cyclic operation, repetitive operation. Initial task: Only once at the time of entering the RUN | ||
| Control period | Main task cyclic time: 0.5ms, 1ms, 2ms, 4ms Periodic task cyclic time: Multiple setting of main task | ||
| I/O Control method | Synchronized update with main task cycle (Refresh method) | ||
| Program language | Ladder Diagram (Function block), Structured Text, G-Code | ||
| Number of instruction | Operator | 18 | |
| Basic function | 202 | ||
| Basic function block | 174 | ||
| Special function block | 97 | ||
| Processing speed | Basic | 6.25ns or more (General point/coil) | |
| Move | 5ns or more (Word type) | ||
| Arithmetic | 30ns or more (Word type) | ||
| Program | number | Max. 256 | |
| Capacity | 10MB (Motion program), 10MB (NC program) | ||
| Data area | Symbolic variable (A) | 4.096KB (Retain setting available up to 2,048KB) | |
| Input variable (I) | 16KB | ||
| Output variable (Q) | 16KB | ||
| Direct variable (M) | 2,048KB (Retain setting available up to 1,024KB) | ||
| Flag variable | F | 128KB | |
| K | 18KB | ||
| U | 1KB | ||
| L | 22KB Note1) | ||
| N | 49KB Note1) | ||
| Timer | No limit in number of I/O points, Time range: 0.001˜4,294,967,295sec (1,193hour) | ||
| Counter | No limit in number of I/O points, Counter range: 64 bit range | ||
| Program | Initial program, Main task program, Periodic task program, NC program | ||
| Operation mode | RUN, STOP | ||
| Restart mode | Cold, Warm | ||
| Self-diagnosis function | Task cycle error, Task time occupancy rate exceed, memory abnormal, power abnormal, etc. | ||
| Back-up method | Retain area setting in basic parameter or retain variable setting. | ||
| Number of control axis Note2) | XMC-E32A,E32C | 32 axes (Real/Virtual axis), 4axes (Virtual axis), 64 slaves (Max 32 slaves in case of 32 axes (Servo, INV) control) | |
| XMC-E16A | 16 axes (Real/Virtual axis), 2axes (Virtual axis), 32 slaves (Max 16 slaves in case of 16 axes(Servo, INV) control) | ||
| XMC-E08A | 8 axes (Real/Virtual axis), 1axis (Virtual axis), 16 slaves (Max 8 slaves in case of 8 axes(Servo, INV) control) | ||
| CAM operation | XMC-E32A,E32C | 32 profiles/32,768 points | |
| XMC-E16A | 16 profiles/16,384 points | ||
| XMC-E08A | 8 profiles/8,192 points | ||
| Communication | EtherCAT (CoE: CANopen over EtherCAT, FoE: File Access over EtherCAT) | ||
| Communication/Control period | 0.5ms, 1ms, 2ms, 4ms (Same with main task period) | ||
| Servo drive | EtherCAT servo drive which supports CoE | ||
| Control unit | Pulse, mm, inch, degree | ||
| Control method | Position, Velocity, Torque (Servo drive support), Synchronous, Interpolation | ||
| Range of position / Velocity | ±LREAL, 0 | ||
| Torque unit | Rated torque % designation | ||
| Acc./Dec. profile | Trapezoidal, S-curve(Regarding Jerk value set by function block) | ||
| Rage of Acc/Dec | ±LREAL, 0 | ||
| Manual operation | JOG operation | ||
| Absolute system | Available (When using absolute encoder type servo drive) | ||
| Encoder input | Channel | 2 channels | |
| Max.input | 500kpps | ||
| Input method | Line drive input (RS-422A IEC specification), Available open collector output type encoder | ||
| Input type | CW/CCW, Pulse/Dir, Phase A/B | ||
Note1) 'L and N' area are supported by XMC-E32C only.
Catalogues
- Catalog-LS ELECTRIC-PLC-Factory Automation Brochure
- Catalog-LS ELECTRIC-PLC-MOTION CONTROLLER XMC-E32A
- Catalog-LS ELECTRIC-PLC-Auto Products
- Catalog-LS ELECTRIC-PLC-Series (LSP Series (SMPS) brochure)
- Catalog-LS ELECTRIC-PLC-Catalog for Smart Link Board
- Catalog-LS ELECTRIC-PLC-(Leaflet for Smart I/O)
- Catalog-LS ELECTRIC-PLC-Motion_Controller & EtherCAT I/O
- Catalog-LS ELECTRIC-PLC-[XGT Servo] Motion_Controller & EtherCAT I/O
- Catalog-LS ELECTRIC-PLC-[XGT Servo] L7C series
- Catalog-LS ELECTRIC-PLC-[Servo/Motion] L7C Drive & Motor Catalog
XMC Motion Controller
XMC Motion Controller: overview and buying guide
The XMC Motion Controller is made by LS ELECTRIC and listed in our electronic range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the XMC Motion Controller cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the XMC Motion Controller to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine LS ELECTRIC product?
We purchase directly from LS ELECTRIC or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
XMC Motion Controller
The XMC-E32A/E32C delivers high performance EtherCAT-based motion control functions along with a variety of embedded functions and high-tech capabilities specialized for numerical control and robots. In addition to LS ELECTRIC PLC, HMI and servo products, the XMC-E32A/E32C will help you create an even better and optimal solution.
Features
ㆍHigh-speed program processing: 6.25ns (Basic command)
ㆍEtherCAT-based high speed cycle times: 0.5/1/2/4ms (Same as main task cycle time)
ㆍVarious built-in functions
- 8 digital inputs/16 digital outputs, Encoder inputs (2 ch.), Ethernet, Analog Input (2 ch.)/Output (2 ch.) E32A, RS-232C/RS-485_E32C
ㆍRobot control: Delta3, Delta3R, Linear Delta, etc.
ㆍXG5000 software for programming and monitoring
Specification
| Item | Specification | ||
|---|---|---|---|
| Operation method | Main task/Periodic task: Fixed cyclic operation, repetitive operation. Initial task: Only once at the time of entering the RUN | ||
| Control period | Main task cyclic time: 0.5ms, 1ms, 2ms, 4ms Periodic task cyclic time: Multiple setting of main task | ||
| I/O Control method | Synchronized update with main task cycle (Refresh method) | ||
| Program language | Ladder Diagram (Function block), Structured Text, G-Code | ||
| Number of instruction | Operator | 18 | |
| Basic function | 202 | ||
| Basic function block | 174 | ||
| Special function block | 97 | ||
| Processing speed | Basic | 6.25ns or more (General point/coil) | |
| Move | 5ns or more (Word type) | ||
| Arithmetic | 30ns or more (Word type) | ||
| Program | number | Max. 256 | |
| Capacity | 10MB (Motion program), 10MB (NC program) | ||
| Data area | Symbolic variable (A) | 4.096KB (Retain setting available up to 2,048KB) | |
| Input variable (I) | 16KB | ||
| Output variable (Q) | 16KB | ||
| Direct variable (M) | 2,048KB (Retain setting available up to 1,024KB) | ||
| Flag variable | F | 128KB | |
| K | 18KB | ||
| U | 1KB | ||
| L | 22KB Note1) | ||
| N | 49KB Note1) | ||
| Timer | No limit in number of I/O points, Time range: 0.001˜4,294,967,295sec (1,193hour) | ||
| Counter | No limit in number of I/O points, Counter range: 64 bit range | ||
| Program | Initial program, Main task program, Periodic task program, NC program | ||
| Operation mode | RUN, STOP | ||
| Restart mode | Cold, Warm | ||
| Self-diagnosis function | Task cycle error, Task time occupancy rate exceed, memory abnormal, power abnormal, etc. | ||
| Back-up method | Retain area setting in basic parameter or retain variable setting. | ||
| Number of control axis Note2) | XMC-E32A,E32C | 32 axes (Real/Virtual axis), 4axes (Virtual axis), 64 slaves (Max 32 slaves in case of 32 axes (Servo, INV) control) | |
| XMC-E16A | 16 axes (Real/Virtual axis), 2axes (Virtual axis), 32 slaves (Max 16 slaves in case of 16 axes(Servo, INV) control) | ||
| XMC-E08A | 8 axes (Real/Virtual axis), 1axis (Virtual axis), 16 slaves (Max 8 slaves in case of 8 axes(Servo, INV) control) | ||
| CAM operation | XMC-E32A,E32C | 32 profiles/32,768 points | |
| XMC-E16A | 16 profiles/16,384 points | ||
| XMC-E08A | 8 profiles/8,192 points | ||
| Communication | EtherCAT (CoE: CANopen over EtherCAT, FoE: File Access over EtherCAT) | ||
| Communication/Control period | 0.5ms, 1ms, 2ms, 4ms (Same with main task period) | ||
| Servo drive | EtherCAT servo drive which supports CoE | ||
| Control unit | Pulse, mm, inch, degree | ||
| Control method | Position, Velocity, Torque (Servo drive support), Synchronous, Interpolation | ||
| Range of position / Velocity | ±LREAL, 0 | ||
| Torque unit | Rated torque % designation | ||
| Acc./Dec. profile | Trapezoidal, S-curve(Regarding Jerk value set by function block) | ||
| Rage of Acc/Dec | ±LREAL, 0 | ||
| Manual operation | JOG operation | ||
| Absolute system | Available (When using absolute encoder type servo drive) | ||
| Encoder input | Channel | 2 channels | |
| Max.input | 500kpps | ||
| Input method | Line drive input (RS-422A IEC specification), Available open collector output type encoder | ||
| Input type | CW/CCW, Pulse/Dir, Phase A/B | ||
Note1) 'L and N' area are supported by XMC-E32C only.
Catalogues
- Catalog-LS ELECTRIC-PLC-Factory Automation Brochure
- Catalog-LS ELECTRIC-PLC-MOTION CONTROLLER XMC-E32A
- Catalog-LS ELECTRIC-PLC-Auto Products
- Catalog-LS ELECTRIC-PLC-Series (LSP Series (SMPS) brochure)
- Catalog-LS ELECTRIC-PLC-Catalog for Smart Link Board
- Catalog-LS ELECTRIC-PLC-(Leaflet for Smart I/O)
- Catalog-LS ELECTRIC-PLC-Motion_Controller & EtherCAT I/O
- Catalog-LS ELECTRIC-PLC-[XGT Servo] Motion_Controller & EtherCAT I/O
- Catalog-LS ELECTRIC-PLC-[XGT Servo] L7C series
- Catalog-LS ELECTRIC-PLC-[Servo/Motion] L7C Drive & Motor Catalog
