Two-stage Charged Electrostatic Precipitator CEP-30
Two-stage Charged Electrostatic Precipitator
Filter: Demister, lonizer, Cell
Cleaning: Washable, Semi-permanent Use Possible
Purpose: Oil Mist, Haze and Smoke Removal
Product Introduction
This is a two-stage charging electrostatic precipitator that removes particles using electrostatic forces.
It can remove oil mist, fume, and smoke with high filtration efficiency.
Specifications and Standards
Product Specifications
* The height mentioned in the table excludes the height of the wheels.
* Specifications are subject to change for performance improvement.
Key Features
Electrostatic Precipitator
It uses electrostatic forces to attach particles from pollutants to the collection cell, achieving very high dust collection efficiency, capable of removing 95-98% of particles as small as 0.01um.
The frequency of trips (shutdowns) due to contamination of the collection cell and the rate of efficiency decrease are low.
Trips do not occur even if moisture enters the collection cell.
It uses a low-noise blower, resulting in low noise and power consumption.
First Stage: Demister
A demister is installed to increase the filtration efficiency of the collection cell located downstream.
The demister spreads particles by inertia and gravitational settling.
Second Stage: lonizer
The ionizer ionizes particles positively, making them electromagnetic.
Third Stage: Collection Cell
Particles that are electromagnetic get attached to the collection cell and removed by electrostatic forces.
Options (Optional)
Control Box / Distribution Board
Switches and circuit breakers, control devices are assembled in a separate sheet metal box.
The electrical control devices are not affected by pollutants, extending their lifespan.
It can be attached and used at the desired location.
Local Switch, Contact Configuration
A local switch for turning the power ON/OFF is added.
It can be attached and used at the desired location.
The electrical circuit's contacts can be configured to turn ON/OFF simultaneously with other equipment.
Carbon Mat Filter
You can add a carbon mat filter.
The carbon mat filter uses the adsorption properties of activated carbon to remove odors from gases.
Flexible Conduit for Wiring
A flexible conduit is applied over the wiring to prevent fire due to insulation damage.
Customization / Custom Design
Upon request, it is possible to modify the design or develop new products beyond standard specifications.
We possess the highest level of design responsiveness in the industry.
Power Specification Change
You can choose from 220V/ 380V/ 440V, single-phase/three-phase, 50Hz /60Hz.
Precautions
Do not inhale flammable substances such as gasoline or thinner.
For high-temperature oil mist, please inquire separately.
Detailed specification sheets are shown in the product images.
Two-stage Charged Electrostatic Precipitator CEP-30
Two-stage Charged Electrostatic Precipitator CEP-30: overview and buying guide
The Two-stage Charged Electrostatic Precipitator CEP-30 (model CEP-30) is made by CleanAirTech and listed in our hvac range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the Two-stage Charged Electrostatic Precipitator CEP-30 cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the Two-stage Charged Electrostatic Precipitator CEP-30 to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine CleanAirTech product?
We purchase directly from CleanAirTech or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
Two-stage Charged Electrostatic Precipitator
Filter: Demister, lonizer, Cell
Cleaning: Washable, Semi-permanent Use Possible
Purpose: Oil Mist, Haze and Smoke Removal
Product Introduction
This is a two-stage charging electrostatic precipitator that removes particles using electrostatic forces.
It can remove oil mist, fume, and smoke with high filtration efficiency.
Specifications and Standards
Product Specifications
* The height mentioned in the table excludes the height of the wheels.
* Specifications are subject to change for performance improvement.
Key Features
Electrostatic Precipitator
It uses electrostatic forces to attach particles from pollutants to the collection cell, achieving very high dust collection efficiency, capable of removing 95-98% of particles as small as 0.01um.
The frequency of trips (shutdowns) due to contamination of the collection cell and the rate of efficiency decrease are low.
Trips do not occur even if moisture enters the collection cell.
It uses a low-noise blower, resulting in low noise and power consumption.
First Stage: Demister
A demister is installed to increase the filtration efficiency of the collection cell located downstream.
The demister spreads particles by inertia and gravitational settling.
Second Stage: lonizer
The ionizer ionizes particles positively, making them electromagnetic.
Third Stage: Collection Cell
Particles that are electromagnetic get attached to the collection cell and removed by electrostatic forces.
Options (Optional)
Control Box / Distribution Board
Switches and circuit breakers, control devices are assembled in a separate sheet metal box.
The electrical control devices are not affected by pollutants, extending their lifespan.
It can be attached and used at the desired location.
Local Switch, Contact Configuration
A local switch for turning the power ON/OFF is added.
It can be attached and used at the desired location.
The electrical circuit's contacts can be configured to turn ON/OFF simultaneously with other equipment.
Carbon Mat Filter
You can add a carbon mat filter.
The carbon mat filter uses the adsorption properties of activated carbon to remove odors from gases.
Flexible Conduit for Wiring
A flexible conduit is applied over the wiring to prevent fire due to insulation damage.
Customization / Custom Design
Upon request, it is possible to modify the design or develop new products beyond standard specifications.
We possess the highest level of design responsiveness in the industry.
Power Specification Change
You can choose from 220V/ 380V/ 440V, single-phase/three-phase, 50Hz /60Hz.
Precautions
Do not inhale flammable substances such as gasoline or thinner.
For high-temperature oil mist, please inquire separately.
Detailed specification sheets are shown in the product images.



















