TNX Timer TNX-12N
TNX Timer TNX-12N
TNX Timer TNX-12N
TNX Timer TNX-12N
New
TNX Timer TNX-12N
TNX Timer TNX-12N
TNX Timer TNX-12N
TNX Timer TNX-12N

TNX Timer TNX-12N

1.Aluminum Die-Casted Box

  As the PCB of TNX timer is located in the aluminum dis-casted box, it facilitates the water-proofing and

  dust-proofing.

2.All function in Digtal

  Using the highly quantitative micro-computer circuit, when the noise inflow from the outside, the program

  in the EP-ROM pack senses the noise, and performs the function of auto-compensation.

3.Pre-Wired with Solenoid

  TNX timer includes the built-in solenoid coils(PM-63) and all necessary wiring. There should be no

  need to wire between timer card and solenoid coil to prevent humidity/dust from corrosion of coil.

4.Exterior design for all controls

  It has exterior displays like main power switch, time setting keys. These exterior displays allow the

  monitoring, time setting and damage checking of the timer without opening the timer case.

5.Free Voltage Function

  This timer board has a free voltage function (AC85 ~ 240V/50 ~ 60Hz)

6.Variety of Single/Multiple/Central Control

  By using a Remote ON/OFF and Finish signal output functions, TNX timer is available in Sing/Multiple/

  Central control that fits your Dust collector system.

1. General Timer Control

2. All you need to do is the connection of the main AC of two wires.

1. Each TNX Timer has 12 outputs. If you need 100 outputs, you use 9 sets of TNX Timers in one cycle sequence.

2. Only two wires can make them connection easily.

1. If you operate PLC of DCS controller, TNX Timer can be controlled by dry contact.

2. Communication contact : Dry contact

3. Finish contact : Dry contact

Specification TNE Timer
           Output Signal                                   Pneumatic
           Feature                                   Solenoid encapsulated
           Control Type                                   EP-ROM Digital
           Enclosure                                   Aluminum Die-Casting NEMA 4
           Max. Output                                   6p, 12p
           Pulse Time                                   0.001 ~ 0.999 sec
           Dwell Time                                   1 ~ 999 sec
           Power Supply                                   AC85 ~ 240V / 50 ~ 60Hz
           Fuse                                   2A
           Pressure                                   0.5 ~ 7.5 kg/㎠
           Operating
             Temperature
                                  -20 ~ +60℃
                                  (If not freezing condition)
           Terminal Type                                   1.25 pin & 1.25 4Y


Detailed specification sheets are shown in the product images.

Error product group when enable variant picker

Availability: In stock
Categories: Hydraulic · Fluid
TNX Timer TNX-12N

TNX Timer TNX-12N

$0.00

TNX Timer TNX-12N: overview and buying guide

The TNX Timer TNX-12N (model TNX-12N) is made by TAEHA Machinery and listed in our hydraulic · fluid range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.

Frequently asked questions

How much does the TNX Timer TNX-12N cost?

Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.

Can you ship the TNX Timer TNX-12N to my country?

Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.

Is this a genuine TAEHA Machinery product?

We purchase directly from TAEHA Machinery or its authorised channels and confirm the model and specifications with the manufacturer before ordering.

What is the minimum order quantity?

For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.

1.Aluminum Die-Casted Box

  As the PCB of TNX timer is located in the aluminum dis-casted box, it facilitates the water-proofing and

  dust-proofing.

2.All function in Digtal

  Using the highly quantitative micro-computer circuit, when the noise inflow from the outside, the program

  in the EP-ROM pack senses the noise, and performs the function of auto-compensation.

3.Pre-Wired with Solenoid

  TNX timer includes the built-in solenoid coils(PM-63) and all necessary wiring. There should be no

  need to wire between timer card and solenoid coil to prevent humidity/dust from corrosion of coil.

4.Exterior design for all controls

  It has exterior displays like main power switch, time setting keys. These exterior displays allow the

  monitoring, time setting and damage checking of the timer without opening the timer case.

5.Free Voltage Function

  This timer board has a free voltage function (AC85 ~ 240V/50 ~ 60Hz)

6.Variety of Single/Multiple/Central Control

  By using a Remote ON/OFF and Finish signal output functions, TNX timer is available in Sing/Multiple/

  Central control that fits your Dust collector system.

1. General Timer Control

2. All you need to do is the connection of the main AC of two wires.

1. Each TNX Timer has 12 outputs. If you need 100 outputs, you use 9 sets of TNX Timers in one cycle sequence.

2. Only two wires can make them connection easily.

1. If you operate PLC of DCS controller, TNX Timer can be controlled by dry contact.

2. Communication contact : Dry contact

3. Finish contact : Dry contact

Specification TNE Timer
           Output Signal                                   Pneumatic
           Feature                                   Solenoid encapsulated
           Control Type                                   EP-ROM Digital
           Enclosure                                   Aluminum Die-Casting NEMA 4
           Max. Output                                   6p, 12p
           Pulse Time                                   0.001 ~ 0.999 sec
           Dwell Time                                   1 ~ 999 sec
           Power Supply                                   AC85 ~ 240V / 50 ~ 60Hz
           Fuse                                   2A
           Pressure                                   0.5 ~ 7.5 kg/㎠
           Operating
             Temperature
                                  -20 ~ +60℃
                                  (If not freezing condition)
           Terminal Type                                   1.25 pin & 1.25 4Y


Detailed specification sheets are shown in the product images.