Technical Sales ALPHA LUBRICATING SYSTEM
Technical Sales ALPHA LUBRICATING SYSTEM
Technical Sales ALPHA LUBRICATING SYSTEM
Technical Sales ALPHA LUBRICATING SYSTEM
Technical Sales ALPHA LUBRICATING SYSTEM
New
Technical Sales ALPHA LUBRICATING SYSTEM
Technical Sales ALPHA LUBRICATING SYSTEM
Technical Sales ALPHA LUBRICATING SYSTEM
Technical Sales ALPHA LUBRICATING SYSTEM
Technical Sales ALPHA LUBRICATING SYSTEM

Technical Sales ALPHA LUBRICATING SYSTEM

Ocean Marine Services provides technical Services and engineering services to global ship owner company.
We successfully launched a lot of difficult engineering project with our skillful engineers without any problem.
If you have any inquires about technical & engineering service, please contact us so that we can provide the best services to your good company.

Reconditioning Services

- Piston Crown / Skirt

- Cylinder Liner

- EXH.V/V Spindle / Bottom Piece 

- EXH,V/V CAGE 

- Piston Road

- Cylinder Liner

- Fuel Injection Parts

- FIVA / EKFI / EKVA VALVE

- Governor

- Major parts for 4 stroke

ALPHA LUBRICATING SYSTEM
 
RETROFIT OF ALPHA LUBRICATING SYSTEM
Effect
  • Saving of Cyl. oil consumption
  • Reduction in Cyl. Liner & Piston ring wear down
  • Easier Operation than Mechanical lubricator
  • Less smoke formation and Lower NOx Emission Level
     - Installable during voyage, dry-docking and at port (working day : 6 days)

Components

  • Alpha Lubricator
  • Pump Station
  • Load Transmitter
  • Angle Encoder/ALCU
  • Back up trigger system, etc,.T

COMPARISON OF CYL. LUBRICATING SYSTEM

Description Mechanical Type Alpha Lubricator
Feed Rate 0.9 g/bhp.h (K/L) 1.1 g/bhp.h (S) S % x 0.25 g/bhph (Standard :0.8 g/bhp)
Oil Consumption RPM dependent LOAD dependent
Adjustment of Feed Rate Pump Stroke (Adjusting Bolt) Injection Frequency (in HMI)
Stroke Adjustable Fixed
Injection Frequency 1 / 1 revolution ( fixed ) Adjustable (1 / 4 revolution )
Injection Pressure 3 – 5 bar 25 – 30 bar
Oil Actuating Power Camshaft Rotation Booster Oil Pressure
Operating Method Mechanic Electronic

LUBRICATION PRINCIPLE

  • Intermittent lubrication where an engine cycle with lube oil injection is followed by one or more (normally 4) cycles without oil injection
  • The injection is timed in relation to the position of the piston ring
  • The specific feed rate is controlled by variation of the injection frequency. (solenoid valve on-off interval)
  • Adjusting of the feed rate in relation to MEP, LCD and POWER
  • Pre-lubrication of the cylinder can be done just before start of the engine. (12 time Continue)
  • Reduction of the Emission level
  • Element for Intelligent Engine Concept

BWTS SYSTEM

HHI has developed a ballast water Treatment system for ships, Eco & HiBallast, which will protect marine environment from the transfer of foreign organisms via ballast water

Detailed specification sheets are shown in the product images.

Error product group when enable variant picker

Availability: In stock
Technical Sales ALPHA LUBRICATING SYSTEM

Technical Sales ALPHA LUBRICATING SYSTEM

$0.00

Technical Sales ALPHA LUBRICATING SYSTEM: overview and buying guide

The Technical Sales ALPHA LUBRICATING SYSTEM (model ALPHA LUBRICATING SYSTEM) is made by OCEAN MARINE SERVICE and listed in our shipbuilding · marine range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.

Frequently asked questions

How much does the Technical Sales ALPHA LUBRICATING SYSTEM cost?

Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.

Can you ship the Technical Sales ALPHA LUBRICATING SYSTEM to my country?

Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.

Is this a genuine OCEAN MARINE SERVICE product?

We purchase directly from OCEAN MARINE SERVICE or its authorised channels and confirm the model and specifications with the manufacturer before ordering.

What is the minimum order quantity?

For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.

Ocean Marine Services provides technical Services and engineering services to global ship owner company.
We successfully launched a lot of difficult engineering project with our skillful engineers without any problem.
If you have any inquires about technical & engineering service, please contact us so that we can provide the best services to your good company.

Reconditioning Services

- Piston Crown / Skirt

- Cylinder Liner

- EXH.V/V Spindle / Bottom Piece 

- EXH,V/V CAGE 

- Piston Road

- Cylinder Liner

- Fuel Injection Parts

- FIVA / EKFI / EKVA VALVE

- Governor

- Major parts for 4 stroke

ALPHA LUBRICATING SYSTEM
 
RETROFIT OF ALPHA LUBRICATING SYSTEM
Effect
  • Saving of Cyl. oil consumption
  • Reduction in Cyl. Liner & Piston ring wear down
  • Easier Operation than Mechanical lubricator
  • Less smoke formation and Lower NOx Emission Level
     - Installable during voyage, dry-docking and at port (working day : 6 days)

Components

  • Alpha Lubricator
  • Pump Station
  • Load Transmitter
  • Angle Encoder/ALCU
  • Back up trigger system, etc,.T

COMPARISON OF CYL. LUBRICATING SYSTEM

Description Mechanical Type Alpha Lubricator
Feed Rate 0.9 g/bhp.h (K/L) 1.1 g/bhp.h (S) S % x 0.25 g/bhph (Standard :0.8 g/bhp)
Oil Consumption RPM dependent LOAD dependent
Adjustment of Feed Rate Pump Stroke (Adjusting Bolt) Injection Frequency (in HMI)
Stroke Adjustable Fixed
Injection Frequency 1 / 1 revolution ( fixed ) Adjustable (1 / 4 revolution )
Injection Pressure 3 – 5 bar 25 – 30 bar
Oil Actuating Power Camshaft Rotation Booster Oil Pressure
Operating Method Mechanic Electronic

LUBRICATION PRINCIPLE

  • Intermittent lubrication where an engine cycle with lube oil injection is followed by one or more (normally 4) cycles without oil injection
  • The injection is timed in relation to the position of the piston ring
  • The specific feed rate is controlled by variation of the injection frequency. (solenoid valve on-off interval)
  • Adjusting of the feed rate in relation to MEP, LCD and POWER
  • Pre-lubrication of the cylinder can be done just before start of the engine. (12 time Continue)
  • Reduction of the Emission level
  • Element for Intelligent Engine Concept

BWTS SYSTEM

HHI has developed a ballast water Treatment system for ships, Eco & HiBallast, which will protect marine environment from the transfer of foreign organisms via ballast water

Detailed specification sheets are shown in the product images.