Systems & Controls
MSC's multidiscipline simulation solutions allow engineers to validate and optimize complete mechatronic system performance, improve product quality, and save time and money by avoiding late design changes.
Most of the products we rely on today are actually mechatronic systems comprised of mechanical components; pneumatic, hydraulic or electrical control subsystems; and electronic control units. Engineering these complex systems is a true multidiscipline design challenge that is often not fully tested and validated until late in the product development process, leading to costly design changes.
Traditional "build & test" methods and isolated tools for the virtual prototyping of mechanical, electrical, or controls systems neglect important interactions between disciplines, leading to incomplete or inaccurate results. MSC's multidiscipline simulation solutions allow engineers to validate and optimize complete mechatronic system performance, improve product quality, and save time and money by avoiding late design changes.
MSC Software is used for many types of system and control simulations:
- Thermal, electrical, mechanical coupling
- 1-D analysis
- Gaseous flow
- Contact analysis
- Control hardware and software evaluation
- Hydraulic assist technology
- Power exchange points
- Control algorithm processing
- Nonlinear system simulation
- Steady-state capacity studies
Industry Uses:
- Aerospace and Defense: Hydraulic flight control systems, landing gears and brakes, electrical power systems, turbo machinery, valves and controls.
- Automotive: Hybrid electric vehicles, cooling/heating systems, Transmissions, power Steering.
- Motorsports: Hydraulic system components, motors and drives, engine lubrication, front Loader, hydrostatic transmission, cranking circuits, electronic control systems.
Controls Modeling & Analysis
COMPLETE SYSTEM VIRTUAL PROTOTYPING
READY TO USE APPLICATION LIBRARIES SUCH AS THERMAL HYDRAULICS AND POWERTRAIN LIBRARY
EASY5 provides easy to use and interactive modeling environment that allows users to create systems models by selecting from an extensive library of pre-defined components representing complex physical elements like gears, pumps, valves, and heat exchangers.
These simulation techniques can be applied to an extremely broad spectrum of complex systems such as vehicle stability and anti-lock braking systems to HVAC systems and robotics and flight control systems.
EASY5 models are fully compatible with Adams, and SimXpert Motion mechanical modeling & analysis tools.
Mechanical Modeling & Analysis
ADAMS MODELS INTEGRATED WITH EASY5
Adams provide accurate and efficient multibody dynamics and motion analysis of 3D mechanical systems. The core package (Adams/View, Adams/Solver, and Adams/PostProcessor) allows you to import geometry from most major CAD systems or to build a solid model of the mechanical system from scratch.
Adams models can be integrated with EASY5 controls models directly, or via co-simulation for full multidiscipline analysis.
Co-simulation
SATELLITE DISH WITH INTEGRATED ELECTRONIC CONTROL SYSTEM MODEL
CO-SIMULATION MECHANICAL SYSTEM AND CONTROLS SYSTEM ENGINEERING
OPTIMIZING SIZE AND PERFORMANCE FOR A HYDRAULIC PUMP
Controls plug-in in Adams allow simultaneous linking of sophisticated controls to your mechanical system. This synchronous approach facilitates studying the non-independent interactions in a complex system at an early stage.
Adams/Controls and EASY5, communicate by passing state variables back and forth allowing a controller to drive an Adams model in open- or closed-loop fashion. This concurrent exchange of information improves accuracy and efficiency resulting in a productive design environment.
Integrated Mechatronic Simulation
INTEGRATING ELECTRONIC STABILITY CONTROL IN YOUR VEHICLE MODEL
AIRCRAFT LANDING GEAR SYSTEM WITH INTEGRATED HYDRAULIC CONTROL SYSTEM MODEL
Mechatronics plug-in in Adams can be used to directly incorporate control systems into mechanical models by dynamically linking an external system library. Controls models can be leveraged and reused by those who are not familiar with the control systems.
Control system parameters can be quickly adjusted for evaluation and included in a design study for simultaneous optimization of both control system and mechanical system.
Related Products:
- Adams The Multibody Dynamics Simulation Solution
- Easy5 Advanced Controls & Systems Simulation
- SimDesigner CAD-Embedded Multidiscipline Simulation
- SimXpert Fully Integrated Multidiscipline Simulation Solution
Detailed specification sheets are shown in the product images.
Systems & Controls
Systems & Controls: overview and buying guide
The Systems & Controls is made by MSC SOFTWARE and listed in our solutions · services range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the Systems & Controls cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the Systems & Controls to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine MSC SOFTWARE product?
We purchase directly from MSC SOFTWARE or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
MSC's multidiscipline simulation solutions allow engineers to validate and optimize complete mechatronic system performance, improve product quality, and save time and money by avoiding late design changes.
Most of the products we rely on today are actually mechatronic systems comprised of mechanical components; pneumatic, hydraulic or electrical control subsystems; and electronic control units. Engineering these complex systems is a true multidiscipline design challenge that is often not fully tested and validated until late in the product development process, leading to costly design changes.
Traditional "build & test" methods and isolated tools for the virtual prototyping of mechanical, electrical, or controls systems neglect important interactions between disciplines, leading to incomplete or inaccurate results. MSC's multidiscipline simulation solutions allow engineers to validate and optimize complete mechatronic system performance, improve product quality, and save time and money by avoiding late design changes.
MSC Software is used for many types of system and control simulations:
- Thermal, electrical, mechanical coupling
- 1-D analysis
- Gaseous flow
- Contact analysis
- Control hardware and software evaluation
- Hydraulic assist technology
- Power exchange points
- Control algorithm processing
- Nonlinear system simulation
- Steady-state capacity studies
Industry Uses:
- Aerospace and Defense: Hydraulic flight control systems, landing gears and brakes, electrical power systems, turbo machinery, valves and controls.
- Automotive: Hybrid electric vehicles, cooling/heating systems, Transmissions, power Steering.
- Motorsports: Hydraulic system components, motors and drives, engine lubrication, front Loader, hydrostatic transmission, cranking circuits, electronic control systems.
Controls Modeling & Analysis
COMPLETE SYSTEM VIRTUAL PROTOTYPING
READY TO USE APPLICATION LIBRARIES SUCH AS THERMAL HYDRAULICS AND POWERTRAIN LIBRARY
EASY5 provides easy to use and interactive modeling environment that allows users to create systems models by selecting from an extensive library of pre-defined components representing complex physical elements like gears, pumps, valves, and heat exchangers.
These simulation techniques can be applied to an extremely broad spectrum of complex systems such as vehicle stability and anti-lock braking systems to HVAC systems and robotics and flight control systems.
EASY5 models are fully compatible with Adams, and SimXpert Motion mechanical modeling & analysis tools.
Mechanical Modeling & Analysis
ADAMS MODELS INTEGRATED WITH EASY5
Adams provide accurate and efficient multibody dynamics and motion analysis of 3D mechanical systems. The core package (Adams/View, Adams/Solver, and Adams/PostProcessor) allows you to import geometry from most major CAD systems or to build a solid model of the mechanical system from scratch.
Adams models can be integrated with EASY5 controls models directly, or via co-simulation for full multidiscipline analysis.
Co-simulation
SATELLITE DISH WITH INTEGRATED ELECTRONIC CONTROL SYSTEM MODEL
CO-SIMULATION MECHANICAL SYSTEM AND CONTROLS SYSTEM ENGINEERING
OPTIMIZING SIZE AND PERFORMANCE FOR A HYDRAULIC PUMP
Controls plug-in in Adams allow simultaneous linking of sophisticated controls to your mechanical system. This synchronous approach facilitates studying the non-independent interactions in a complex system at an early stage.
Adams/Controls and EASY5, communicate by passing state variables back and forth allowing a controller to drive an Adams model in open- or closed-loop fashion. This concurrent exchange of information improves accuracy and efficiency resulting in a productive design environment.
Integrated Mechatronic Simulation
INTEGRATING ELECTRONIC STABILITY CONTROL IN YOUR VEHICLE MODEL
AIRCRAFT LANDING GEAR SYSTEM WITH INTEGRATED HYDRAULIC CONTROL SYSTEM MODEL
Mechatronics plug-in in Adams can be used to directly incorporate control systems into mechanical models by dynamically linking an external system library. Controls models can be leveraged and reused by those who are not familiar with the control systems.
Control system parameters can be quickly adjusted for evaluation and included in a design study for simultaneous optimization of both control system and mechanical system.
Related Products:
- Adams The Multibody Dynamics Simulation Solution
- Easy5 Advanced Controls & Systems Simulation
- SimDesigner CAD-Embedded Multidiscipline Simulation
- SimXpert Fully Integrated Multidiscipline Simulation Solution
Detailed specification sheets are shown in the product images.









