Pressure Sand Blaster U100
Pressure Sand Blaster U100
Pressure Sand Blaster U100
New
Pressure Sand Blaster U100
Pressure Sand Blaster U100
Pressure Sand Blaster U100

Pressure Sand Blaster U100

U100-S, ABRASIVE BLASTER

BLAST AWAY

Dirt, Rust, Paint and Unwanted Deposits to prepare surface for repair and painting.

The abrasive from the high flow, 10 Gallon, 100 pound U100-S penetrates the deepest pitted area to remove dirt, rust, paint and unwanted deposits. Readies the surface for priming and filler. Ideal for refinishing vehicles, boats, monuments, brick buildings and industrial equipment.

Models

Economical U100-S U103-S
Complete with 8 ft, 4 ply, heavy duty 1/2” hose, clamped securely to Blast Gun. Complete with: 10 ft, 4-ply heavy duty 1/2” hose, quick disconnect fittings on hose and blaster to eliminate a blockage, pressure regulator, moisture filter, 3 seal blocks, and 3 1/8” ceramic nozzles.

Features

  • High flow, 4 ply, 1/2 inch heavy duty hose.
  • Abrasive gun with Safety Shut Off Valve, a unique Uni-ram design, to terminate air and abrasive flow.
  • Tank size is 8.5 US gallons.
  • Pressure Relief Valve, Pressure Gage and cutoff valves for supply air, abrasive and air passage to abrasive.

Operation

Filling the tank with Abrasive is quick and easy:

  • Pour abrasive with ease into the Built-In Funnel at top of the tank.
  • Return the maintenance-free Removable Filler Plug and apply air pressure, which forces the plug upward and seals the tank.

Blasting Abrasive  

  • Open Air Inlet Shut-Off Valve all the way on side of tank.
  • Adjust Abrasive Control Valve on bottom of tank. This regulates the mixture of air to abrasive.
  • Squeeze Safety Shut-Off Valve to activate flow of abrasive.

Abrasives include: glass beads, metal shot, aluminum oxide and nut shells.

NOTE: Uni-ram recommends against the use of coal and other slag products that may contain and expose the user to intrinsically hazardous dusts, such as beryllium.

Appropriate protective equipment should be worn at all times during blasting operations.

The Safety Shut-Off is an innovative Uni-ram design. Releasing lever terminates abrasive flow for operator safety.

Specifications

  • 5-10 HP compressor provides 7-20 CFM at 80 PSI
  • 100 lb abrasive capacity.
  • large, 4 ply, 1/2 inch hose diameter for high flow and long life.

Shipping Dimensions: 17″w x 17″d x 34″h (43cmW x 43cmD x 86cmH) Shipping Weight: 55 lb (25kg)

Part Number Nozzle Inside Dia. (in) Compressor (hp) CFM@80 PSI Abrasive Consumption (lb/hr) Surface Blasting   (sq ft per minute)
10-268 3/32 5 7 80-100 0.5
10-260 1/8 10 20 150-170 1 to 1.5

Catalogues

Error product group when enable variant picker

Availability: In stock
Pressure Sand Blaster U100

Pressure Sand Blaster U100

$0.00

Pressure Sand Blaster U100: overview and buying guide

The Pressure Sand Blaster U100 (model U100) is made by UNI-RAM and listed in our environment · energy range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.

Frequently asked questions

How much does the Pressure Sand Blaster U100 cost?

Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.

Can you ship the Pressure Sand Blaster U100 to my country?

Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.

Is this a genuine UNI-RAM product?

We purchase directly from UNI-RAM or its authorised channels and confirm the model and specifications with the manufacturer before ordering.

What is the minimum order quantity?

For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.

U100-S, ABRASIVE BLASTER

BLAST AWAY

Dirt, Rust, Paint and Unwanted Deposits to prepare surface for repair and painting.

The abrasive from the high flow, 10 Gallon, 100 pound U100-S penetrates the deepest pitted area to remove dirt, rust, paint and unwanted deposits. Readies the surface for priming and filler. Ideal for refinishing vehicles, boats, monuments, brick buildings and industrial equipment.

Models

Economical U100-S U103-S
Complete with 8 ft, 4 ply, heavy duty 1/2” hose, clamped securely to Blast Gun. Complete with: 10 ft, 4-ply heavy duty 1/2” hose, quick disconnect fittings on hose and blaster to eliminate a blockage, pressure regulator, moisture filter, 3 seal blocks, and 3 1/8” ceramic nozzles.

Features

  • High flow, 4 ply, 1/2 inch heavy duty hose.
  • Abrasive gun with Safety Shut Off Valve, a unique Uni-ram design, to terminate air and abrasive flow.
  • Tank size is 8.5 US gallons.
  • Pressure Relief Valve, Pressure Gage and cutoff valves for supply air, abrasive and air passage to abrasive.

Operation

Filling the tank with Abrasive is quick and easy:

  • Pour abrasive with ease into the Built-In Funnel at top of the tank.
  • Return the maintenance-free Removable Filler Plug and apply air pressure, which forces the plug upward and seals the tank.

Blasting Abrasive  

  • Open Air Inlet Shut-Off Valve all the way on side of tank.
  • Adjust Abrasive Control Valve on bottom of tank. This regulates the mixture of air to abrasive.
  • Squeeze Safety Shut-Off Valve to activate flow of abrasive.

Abrasives include: glass beads, metal shot, aluminum oxide and nut shells.

NOTE: Uni-ram recommends against the use of coal and other slag products that may contain and expose the user to intrinsically hazardous dusts, such as beryllium.

Appropriate protective equipment should be worn at all times during blasting operations.

The Safety Shut-Off is an innovative Uni-ram design. Releasing lever terminates abrasive flow for operator safety.

Specifications

  • 5-10 HP compressor provides 7-20 CFM at 80 PSI
  • 100 lb abrasive capacity.
  • large, 4 ply, 1/2 inch hose diameter for high flow and long life.

Shipping Dimensions: 17″w x 17″d x 34″h (43cmW x 43cmD x 86cmH) Shipping Weight: 55 lb (25kg)

Part Number Nozzle Inside Dia. (in) Compressor (hp) CFM@80 PSI Abrasive Consumption (lb/hr) Surface Blasting   (sq ft per minute)
10-268 3/32 5 7 80-100 0.5
10-260 1/8 10 20 150-170 1 to 1.5

Catalogues