Test and Measurement – illustrative image, not the exact model
New

Plasma Welding Machine KT-Micro Plasma 50XP

Specification
Input Power 220V, 1/3P, 50/60Hz
Output Current 0.3 ~ 50A
Input Power 2.2Kw
Output Load Voltage 25-40V
No-load Voltage 100V
Initial Current 0.3 ~ 50A
Crater Current 0.3 ~ 50A
Pulse Depth Current 0.3 ~ 50A
Pilot Arc 0.3 ~ 10A
Pilot Gas 0.1 ~ 2.0 l/min
Shield Gas 0.5 ~ 15 l/min
Duty Cycle 100%
Slope Time Up 0.1 ~ 10 sec Down 0.1 ~ 15 sec
Pulse Frequency 0.5 ~ 200Hz
Pulse Width 5 ~ 85%
Gas Delay Time Initial 0.1 ~ 5 sec Post 0.1 ~ 15 sec
Size 320*600*560mm
Weight(NET) 45kg

Applicable for welding ultra-thin plates and fine metals / Digital method data setting possible via microprocessor control, 20 channel memory / Precise output control possible from a minimum of 0.3A

Sequence settings can be freely changed according to the base material's characteristics

Power control uses IGBT INVERTER method / PWM control method

Features

ㆍ20 Channel Memory Function : With the digital control method, settings for each SEQUENCE can be confirmed via LED DISPLAY, then individually stored in 20 independent channels and recalled for use when needed.

ㆍSetting adjustment function via precise DIGITAL PANEL

ㆍBy adopting a DIGITAL ENCODER instead of a volume type, the precision of setting values is increased by 1/10, allowing for fine adjustments.

ㆍDIGITAL EL-FLOW adopted : To maintain the precision of the PILOT flame, DIGITAL FLOW CONTROL is adopted, allowing PILOT GAS volume to be adjusted with 1/100 precision.

ㆍUP SLOPE Time Adjustment Function : Allows adjustment of UP SLOPE time (0.0~10.0 seconds) to stabilize entry until the main welding point.

ㆍDOWN SLOPE Time Adjustment Function : By adjusting DOWN SLOPE time (0.0~10.0 seconds), it prevents CRACKS at the CRATER point caused by rapid cooling and maintains the stability of the MAIN ARC.

Error product group when enable variant picker

Availability: In stock
Categories: Test · Measurement
Test and Measurement – illustrative image, not the exact model

Plasma Welding Machine KT-Micro Plasma 50XP

$0.00

Plasma Welding Machine KT-Micro Plasma 50XP: overview and buying guide

The Plasma Welding Machine KT-Micro Plasma 50XP (model KT-Micro Plasma 50XP) is made by KT ENG and listed in our test · measurement range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.

Frequently asked questions

How much does the Plasma Welding Machine KT-Micro Plasma 50XP cost?

Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.

Can you ship the Plasma Welding Machine KT-Micro Plasma 50XP to my country?

Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.

Is this a genuine KT ENG product?

We purchase directly from KT ENG or its authorised channels and confirm the model and specifications with the manufacturer before ordering.

What is the minimum order quantity?

For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.

Specification
Input Power 220V, 1/3P, 50/60Hz
Output Current 0.3 ~ 50A
Input Power 2.2Kw
Output Load Voltage 25-40V
No-load Voltage 100V
Initial Current 0.3 ~ 50A
Crater Current 0.3 ~ 50A
Pulse Depth Current 0.3 ~ 50A
Pilot Arc 0.3 ~ 10A
Pilot Gas 0.1 ~ 2.0 l/min
Shield Gas 0.5 ~ 15 l/min
Duty Cycle 100%
Slope Time Up 0.1 ~ 10 sec Down 0.1 ~ 15 sec
Pulse Frequency 0.5 ~ 200Hz
Pulse Width 5 ~ 85%
Gas Delay Time Initial 0.1 ~ 5 sec Post 0.1 ~ 15 sec
Size 320*600*560mm
Weight(NET) 45kg

Applicable for welding ultra-thin plates and fine metals / Digital method data setting possible via microprocessor control, 20 channel memory / Precise output control possible from a minimum of 0.3A

Sequence settings can be freely changed according to the base material's characteristics

Power control uses IGBT INVERTER method / PWM control method

Features

ㆍ20 Channel Memory Function : With the digital control method, settings for each SEQUENCE can be confirmed via LED DISPLAY, then individually stored in 20 independent channels and recalled for use when needed.

ㆍSetting adjustment function via precise DIGITAL PANEL

ㆍBy adopting a DIGITAL ENCODER instead of a volume type, the precision of setting values is increased by 1/10, allowing for fine adjustments.

ㆍDIGITAL EL-FLOW adopted : To maintain the precision of the PILOT flame, DIGITAL FLOW CONTROL is adopted, allowing PILOT GAS volume to be adjusted with 1/100 precision.

ㆍUP SLOPE Time Adjustment Function : Allows adjustment of UP SLOPE time (0.0~10.0 seconds) to stabilize entry until the main welding point.

ㆍDOWN SLOPE Time Adjustment Function : By adjusting DOWN SLOPE time (0.0~10.0 seconds), it prevents CRACKS at the CRATER point caused by rapid cooling and maintains the stability of the MAIN ARC.