Motor Soft Starter SMC-Unit
New

Motor Soft Starter SMC-Unit

SMC-UNIT (Motor Soft Starter)

[1] Introduction

Seron's Motor Controller SMC-Unit is designed and assembled to the highest standards so our customers can achieve a maximum machine life and save energy by reducing a starting inrush current which can be reached as much as 7-12 times the full load current of the motor during start-up, and by decreasing the starting torque which is much higher than at full load. And also customers can save a maintenance cost by relaxing mechanical shock by soft start and down too. And it is also designed so that all the functions and parameters are digitally controlled and displayed at the segment of its cover. 2.2-350 KW for AC 220V, 380V, and 440V for three-phase for both single and dual direction types are available. The old model and New model are provided.
Especially New model Motor Soft Starter New SMC-Unit), which is designed and produced to the most advanced technologies in the industry, is a technology-condensed one so as to be able to call a next-generation product as for the Motor Soft Starter. There are various kinds of models such as the plastic case type-C which is applied in low capacity motor, and while the steel case type which is applied in the high capacity motor. And also because the cooling efficiency is maximized by using the epochal improved heat sink, the Unit becomes smaller, lighter, and economical much more than the existing Unit in the world.

[2] Application

- Hoist & Crane - Fan & Blower - Conveyor - Pump - Blender & Mixer
- Saw(Cross&Band) - Milling Machine - Agitator - Crusher - Grinder

[3] Appicable equipments

- The Motor which need a reduction of the inrush current and soft start

- The Motor which need a soft stop

- The Motor which need a frequent start and stop

- The driving Motor which use the method of move-in by Star-Delta, Reactor and Resistor

- The equipment which need a stable operation and extension of long mechanical life

- The driving Motor which is installed in area containing much dust and gas

[4] Model Identification

[5] Basic Specification

Input Voltage Rating - AC220V    - AC380V    - AC440V
Frequency : 50 and 60Hz
Allowable Isolation DC 1500V for one minute between case & case, and case & earth terminal
Allowable Input Voltage ±115% of Input Volt Rating Alarm Output One point relay Output
Control Power Lower than 5W Communication Degree : EIA, RS485 (Option)
Order Input Method Digital Alarm Function Required Alarm-Selective Function
Accuracy of Order 5/1000 FS Installation Installation in indoor panel
ACCuracy of Parameter 100%    
Case Materials - New Model : Low capacity : Plastic case, Medium and high capacity : steel case
- Old model : Steel case
Note - The auto and communication mode are an option. When you place order, please make sure your specification again
         - 440V New model is no available.

[6] Out line Drawing & Size table

6-1. Old Model

Size (mm) Currtent (A) H H1 W W1 D
~40 350 290 200 120 170
~60 380 320 200 120 220
70~250 510 450 270 200 255
~550 560 500 307 225 285
600A or Higher On customer's specification

* This specs may be changed by Design Change and Modification

6-2. New Model

Capacity (KW) H W D W1 H1 비고
220V 3.7 KW (12A) or Lower 85 120 165 110 45 Plastic case-C type
(including Heat sink)
380V 7.5 KW (14A) or Lower
220V 5.5KW ~11KW 320 230 230 90 280 Steel Case 형
380V 11KW ~ 22KW
220V 15KW ~ 22KW 440 185 240 105 400
380V 30KW ~ 37KW
220V 30KW ~ 110KW 500 250 240 150 450
380V 45KW ~ 180KW
220V 130KW ~ 180KW 640 400 280 250 620
380V 200KW ~ 300KW
220V 200KW or Higher Customer's Specification
380V 350KW or Higher

* Please note that in case dual-direction type the size may be changed

Detailed specification sheets are shown in the product images.

Error product group when enable variant picker

Availability: In stock
Categories: Electronic
Motor Soft Starter SMC-Unit

Motor Soft Starter SMC-Unit

$0.00

Motor Soft Starter SMC-Unit: overview and buying guide

The Motor Soft Starter SMC-Unit (model SMC-Unit) is made by SEROUN ELECTRONICS and listed in our electronic range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.

Frequently asked questions

How much does the Motor Soft Starter SMC-Unit cost?

Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.

Can you ship the Motor Soft Starter SMC-Unit to my country?

Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.

Is this a genuine SEROUN ELECTRONICS product?

We purchase directly from SEROUN ELECTRONICS or its authorised channels and confirm the model and specifications with the manufacturer before ordering.

What is the minimum order quantity?

For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.

SMC-UNIT (Motor Soft Starter)

[1] Introduction

Seron's Motor Controller SMC-Unit is designed and assembled to the highest standards so our customers can achieve a maximum machine life and save energy by reducing a starting inrush current which can be reached as much as 7-12 times the full load current of the motor during start-up, and by decreasing the starting torque which is much higher than at full load. And also customers can save a maintenance cost by relaxing mechanical shock by soft start and down too. And it is also designed so that all the functions and parameters are digitally controlled and displayed at the segment of its cover. 2.2-350 KW for AC 220V, 380V, and 440V for three-phase for both single and dual direction types are available. The old model and New model are provided.
Especially New model Motor Soft Starter New SMC-Unit), which is designed and produced to the most advanced technologies in the industry, is a technology-condensed one so as to be able to call a next-generation product as for the Motor Soft Starter. There are various kinds of models such as the plastic case type-C which is applied in low capacity motor, and while the steel case type which is applied in the high capacity motor. And also because the cooling efficiency is maximized by using the epochal improved heat sink, the Unit becomes smaller, lighter, and economical much more than the existing Unit in the world.

[2] Application

- Hoist & Crane - Fan & Blower - Conveyor - Pump - Blender & Mixer
- Saw(Cross&Band) - Milling Machine - Agitator - Crusher - Grinder

[3] Appicable equipments

- The Motor which need a reduction of the inrush current and soft start

- The Motor which need a soft stop

- The Motor which need a frequent start and stop

- The driving Motor which use the method of move-in by Star-Delta, Reactor and Resistor

- The equipment which need a stable operation and extension of long mechanical life

- The driving Motor which is installed in area containing much dust and gas

[4] Model Identification

[5] Basic Specification

Input Voltage Rating - AC220V    - AC380V    - AC440V
Frequency : 50 and 60Hz
Allowable Isolation DC 1500V for one minute between case & case, and case & earth terminal
Allowable Input Voltage ±115% of Input Volt Rating Alarm Output One point relay Output
Control Power Lower than 5W Communication Degree : EIA, RS485 (Option)
Order Input Method Digital Alarm Function Required Alarm-Selective Function
Accuracy of Order 5/1000 FS Installation Installation in indoor panel
ACCuracy of Parameter 100%    
Case Materials - New Model : Low capacity : Plastic case, Medium and high capacity : steel case
- Old model : Steel case
Note - The auto and communication mode are an option. When you place order, please make sure your specification again
         - 440V New model is no available.

[6] Out line Drawing & Size table

6-1. Old Model

Size (mm) Currtent (A) H H1 W W1 D
~40 350 290 200 120 170
~60 380 320 200 120 220
70~250 510 450 270 200 255
~550 560 500 307 225 285
600A or Higher On customer's specification

* This specs may be changed by Design Change and Modification

6-2. New Model

Capacity (KW) H W D W1 H1 비고
220V 3.7 KW (12A) or Lower 85 120 165 110 45 Plastic case-C type
(including Heat sink)
380V 7.5 KW (14A) or Lower
220V 5.5KW ~11KW 320 230 230 90 280 Steel Case 형
380V 11KW ~ 22KW
220V 15KW ~ 22KW 440 185 240 105 400
380V 30KW ~ 37KW
220V 30KW ~ 110KW 500 250 240 150 450
380V 45KW ~ 180KW
220V 130KW ~ 180KW 640 400 280 250 620
380V 200KW ~ 300KW
220V 200KW or Higher Customer's Specification
380V 350KW or Higher

* Please note that in case dual-direction type the size may be changed

Detailed specification sheets are shown in the product images.