MGP Driver LDU
LDU
Lamp Driver Unit
LDU Board
The Lamp Driver Unit is a board that receives various data from the Terminal Server locally and drives the lamps on the display panel.
- Uses Power Transistor Array to drive 64 LED Lamps (recommended for 32-point control when controlling 2 colors)
- Protection device inserted for output circuit protection
- All output points are protected against momentary short circuits.
- Fast processing function when receiving data from Terminal Server
- Connects to Terminal Server with Multi Drop
- Supports self-diagnosis function and Status Command for maintenance
- Easy System Upgrade using FLASH Memory
- Built-in sequential lamp ON/OFF self-test function
- 3-step brightness adjustment function
- 1-channel relay contact output
- Operation status can be controlled via remote control from SPCU
- LAMP TEST and RESET functions by communication and switch
One Chip Micro Controller Unit
Uses ATMEL128 with high-performance, low-power RISC architecture as MCU
- FLASH Memory : 16KByte
- SRAM : 1KByte, EEPROM : 512Byte
- DATA-INPUT : RS-232/422/485
- Maximum 14.7456MIP processing capability with 14.7456MHz System Clock
- Fast processing function when receiving data from Terminal Server
- Connects to Terminal Server with MultiDrop
- Uses Power Transistor Array to drive 64 LAMPs
Serial Communication
LDU Board has 2 built-in UARTs capable of high-speed full-duplex serial communication.
LDU Board and SPCU communicate via RS-232/RS-422/RS-485
| Transmission Parameters | |
|---|---|
| Baud Rate | 4800 / 9600 / 19200 /38400 Baud |
| Packet Size | 10 Bit |
| Data Bit | 8 Bit |
| Start Bit | 1 Bit |
| Stop Bit | 1 or 2 Bit |
| Parity Bit | None/Even/Odd Parity |
| Error check | CRC-16 |
Front Display Lamps (LED)
| Abbreviation | Name | Status |
|---|---|---|
| PWR | Power On/Off | GREEN lit when Power is normal |
| TX0 | COM1 Transmission | YELLOW blinks when COM1 Data is being transmitted |
| RX0 | COM1 Receiving | GREEN blinks when COM1 Data is being received |
| TX1 | COM2 Transmission | YELLOW blinks when COM2 Data is being transmitted |
| RX1 | COM2 Receiving | GREEN blinks when COM2 Data is being received |
| STA | Communication Status | YELLOW when normal, OFF when abnormal |
| RESET | Hardware Reset | RED lit when RESET |
Others
System Upgrade (ISP)
After connecting the LDU Board to the PC with a dedicated down cable via the ISP Download Port of CON5, the control operation program stored in the FLASH Memory inside the board can be easily changed using AVR Studio on the PC.
Power Supply
Option: Configures a high-efficiency DC/DC Converter circuit, allowing stable power supply by receiving DC12 ~24V input.
Electrical Characteristics
| Power Consumption | DC 5V ± 5% less than 0.1A |
|---|---|
| Interface | Communication with Terminal Server via RS-232/422/485 / Communication with Unit via RS-422 |
| System clock | 14.7456 MHz |
| Operating Temperature | -10℃ ~ +60℃ |
| Size | Height 35.5mm, Length 290mm, Width 85mm |
Detailed specification sheets are shown in the product images.
MGP Driver LDU
MGP Driver LDU: overview and buying guide
The MGP Driver LDU (model LDU) is made by JVG and listed in our electronic range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the MGP Driver LDU cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the MGP Driver LDU to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine JVG product?
We purchase directly from JVG or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
LDU
Lamp Driver Unit
LDU Board
The Lamp Driver Unit is a board that receives various data from the Terminal Server locally and drives the lamps on the display panel.
- Uses Power Transistor Array to drive 64 LED Lamps (recommended for 32-point control when controlling 2 colors)
- Protection device inserted for output circuit protection
- All output points are protected against momentary short circuits.
- Fast processing function when receiving data from Terminal Server
- Connects to Terminal Server with Multi Drop
- Supports self-diagnosis function and Status Command for maintenance
- Easy System Upgrade using FLASH Memory
- Built-in sequential lamp ON/OFF self-test function
- 3-step brightness adjustment function
- 1-channel relay contact output
- Operation status can be controlled via remote control from SPCU
- LAMP TEST and RESET functions by communication and switch
One Chip Micro Controller Unit
Uses ATMEL128 with high-performance, low-power RISC architecture as MCU
- FLASH Memory : 16KByte
- SRAM : 1KByte, EEPROM : 512Byte
- DATA-INPUT : RS-232/422/485
- Maximum 14.7456MIP processing capability with 14.7456MHz System Clock
- Fast processing function when receiving data from Terminal Server
- Connects to Terminal Server with MultiDrop
- Uses Power Transistor Array to drive 64 LAMPs
Serial Communication
LDU Board has 2 built-in UARTs capable of high-speed full-duplex serial communication.
LDU Board and SPCU communicate via RS-232/RS-422/RS-485
| Transmission Parameters | |
|---|---|
| Baud Rate | 4800 / 9600 / 19200 /38400 Baud |
| Packet Size | 10 Bit |
| Data Bit | 8 Bit |
| Start Bit | 1 Bit |
| Stop Bit | 1 or 2 Bit |
| Parity Bit | None/Even/Odd Parity |
| Error check | CRC-16 |
Front Display Lamps (LED)
| Abbreviation | Name | Status |
|---|---|---|
| PWR | Power On/Off | GREEN lit when Power is normal |
| TX0 | COM1 Transmission | YELLOW blinks when COM1 Data is being transmitted |
| RX0 | COM1 Receiving | GREEN blinks when COM1 Data is being received |
| TX1 | COM2 Transmission | YELLOW blinks when COM2 Data is being transmitted |
| RX1 | COM2 Receiving | GREEN blinks when COM2 Data is being received |
| STA | Communication Status | YELLOW when normal, OFF when abnormal |
| RESET | Hardware Reset | RED lit when RESET |
Others
System Upgrade (ISP)
After connecting the LDU Board to the PC with a dedicated down cable via the ISP Download Port of CON5, the control operation program stored in the FLASH Memory inside the board can be easily changed using AVR Studio on the PC.
Power Supply
Option: Configures a high-efficiency DC/DC Converter circuit, allowing stable power supply by receiving DC12 ~24V input.
Electrical Characteristics
| Power Consumption | DC 5V ± 5% less than 0.1A |
|---|---|
| Interface | Communication with Terminal Server via RS-232/422/485 / Communication with Unit via RS-422 |
| System clock | 14.7456 MHz |
| Operating Temperature | -10℃ ~ +60℃ |
| Size | Height 35.5mm, Length 290mm, Width 85mm |
Detailed specification sheets are shown in the product images.


