Magnetic KGM Series
KGM SeriesMAGNETIC TYPE
- Small & Compact size
- Convenient installation
- High frequency (up to 200Khz)
- IP68
- CNC machine , Measuring instrument
Features
|
Small & Compact size |
Convenient installation |
High frequency(up to 200Khz) |
IP68 |
CNC machine, Measuring instrument |
Model
External Dimension
Specification
Electrical Spec
| Output type | Sine/Cosine |
|---|---|
| Supply Voltage | DC+5[V] Ripplep-p:less than 5% |
| Current Consumption (Without load ) | 50mA Max |
| Maximum Response Frequency | 200kHz |
| Output level | 1 Vpp Differential signal |
| Output current | Less than 50mA |
| Electromagnetic emissions | KS C IEC 61000-6-2 |
| Electromagnetic immunity | KS C IEC 61000-6-4 |
| Dielectricstrength | KS C IEC 61439-1(500 V AC) |
Output Signal
| Output | Sine/Cosine |
|---|---|
| Signal | A : 1Vpp Sine signal /A : 1Vpp-Sine signal B : 1Vpp Cosine signal /B : 1Vpp-Cosine signal Z : Digital Pulse signal(+) /Z : Digital Pulse signal(-) → Signal in CW A & B 90°phase, Sinal in CCW A & B -90° phase → According to Gear Wheel Reference Mark, Digital differential pulse signal. Gear Wheel module: M1.0 |
Rigid Spec
| Operating Temp. Range | -10°C~ +70°C (No freezing) |
|---|---|
| Storagetemp | -30ºC ~ +120ºC |
| Protectionclass | IP68(KSCIEC60529) |
| InternalVibratio | 10~55Hz/2mm (X,Y 20Cycle / Z 50 Cycle) |
| InternalShock | 50G |
| weight | 100G |
Cable Spec
| Cable Length | 1.2M/2.1M |
|---|---|
| Cable output | Φ5 |
| Connector spec | JN1HS10PL |
| Insulation spec | 3P(AWG28)Shield CABLE |
| Cable meterial | Special TPU(Max.121℃) |
| Certificationstandard | AWM20936 |
Output Phase Shift
Connection Table
| Connector | pin | Output Signal | Relative |
|---|---|---|---|
| 1 | B+,Consine+ | ||
| 2 | B-,Consine- | ||
| 3 | Shield | ||
| 4 | Vcc,+5V | ||
| 5 | A+,Sine+ | ||
| 6 | A-,Sine- | ||
| 7 | OV,GND | ||
| 8 | Z+,Reference Pulse+ | ||
| 9 | Z-,Reference Pulse- | ||
| 10 | Non | ||
Detailed specification sheets are shown in the product images.
Magnetic KGM Series
Magnetic KGM Series: overview and buying guide
The Magnetic KGM Series (model KGM Series) is made by KWANGWOO and listed in our fa (factory automation) range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the Magnetic KGM Series cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the Magnetic KGM Series to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine KWANGWOO product?
We purchase directly from KWANGWOO or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
KGM SeriesMAGNETIC TYPE
- Small & Compact size
- Convenient installation
- High frequency (up to 200Khz)
- IP68
- CNC machine , Measuring instrument
Features
|
Small & Compact size |
Convenient installation |
High frequency(up to 200Khz) |
IP68 |
CNC machine, Measuring instrument |
Model
External Dimension
Specification
Electrical Spec
| Output type | Sine/Cosine |
|---|---|
| Supply Voltage | DC+5[V] Ripplep-p:less than 5% |
| Current Consumption (Without load ) | 50mA Max |
| Maximum Response Frequency | 200kHz |
| Output level | 1 Vpp Differential signal |
| Output current | Less than 50mA |
| Electromagnetic emissions | KS C IEC 61000-6-2 |
| Electromagnetic immunity | KS C IEC 61000-6-4 |
| Dielectricstrength | KS C IEC 61439-1(500 V AC) |
Output Signal
| Output | Sine/Cosine |
|---|---|
| Signal | A : 1Vpp Sine signal /A : 1Vpp-Sine signal B : 1Vpp Cosine signal /B : 1Vpp-Cosine signal Z : Digital Pulse signal(+) /Z : Digital Pulse signal(-) → Signal in CW A & B 90°phase, Sinal in CCW A & B -90° phase → According to Gear Wheel Reference Mark, Digital differential pulse signal. Gear Wheel module: M1.0 |
Rigid Spec
| Operating Temp. Range | -10°C~ +70°C (No freezing) |
|---|---|
| Storagetemp | -30ºC ~ +120ºC |
| Protectionclass | IP68(KSCIEC60529) |
| InternalVibratio | 10~55Hz/2mm (X,Y 20Cycle / Z 50 Cycle) |
| InternalShock | 50G |
| weight | 100G |
Cable Spec
| Cable Length | 1.2M/2.1M |
|---|---|
| Cable output | Φ5 |
| Connector spec | JN1HS10PL |
| Insulation spec | 3P(AWG28)Shield CABLE |
| Cable meterial | Special TPU(Max.121℃) |
| Certificationstandard | AWM20936 |
Output Phase Shift
Connection Table
| Connector | pin | Output Signal | Relative |
|---|---|---|---|
| 1 | B+,Consine+ | ||
| 2 | B-,Consine- | ||
| 3 | Shield | ||
| 4 | Vcc,+5V | ||
| 5 | A+,Sine+ | ||
| 6 | A-,Sine- | ||
| 7 | OV,GND | ||
| 8 | Z+,Reference Pulse+ | ||
| 9 | Z-,Reference Pulse- | ||
| 10 | Non | ||
Detailed specification sheets are shown in the product images.
















