Loudspeaker Test Oscillator SG-3428B
Introduction:
This Tester Oscillator is used in performing an audible inspection for Rub&Buzz generated from loudspeaker. This equipment works at the auto and manual sweep modes and has a high capacity to classify Rub&Buzz due to its unique low THD.
This equipment provides the optimized environment for inspecting Rub&Buzz due to its function of sweeping out at a time all the frequency range within the bandwidth of audio frequency. It has a function to inspect polarity in it, and the test of sweep can be made in link with that of polarity. It has an embedded circuit with high output, which is used in testing a speaker with low impedance. A built-in high-power circuit for testing a low-impedance (2 Ohm) speaker.
Special Feature:
1. As power amplifier is embedded, you can drive a speaker directly.
2. As it has a low THD of sweep oscillator, it is suitable for testing Rub&Buzz.
3. You can make an accurate setting of start frequency, end frequency and its cycle in the auto sweep mode.
4. A timer-type protection circuit is embedded in order to protect the output terminal from short circuit.
5. Remote control method is used in operating it both in sweep mode and in polarity mode. (Foot S/W)
6. You can drive directly a speaker with 2 ohm of low impedance.
7. When an optional filter is attached, the output may come only from the restricted frequency bandwidth.
Option Filter:
Band Pass Filter
Specification:
1. Frequency Range : 10Hz ~ 30KHz
2. Total Harmonics Distortion (THD) : 0.08% (at 1KHz)
3. Level Flatness : +/-0.07dB (at 20Hz to 20KHz)
4. RMS Power : 2 ohm/50W, 4 ohm/20W, 8 ohm/20W
5. Power Requirements : 220V 50/60Hz
6. Dimensions : 308[W] × 140[H] × 302[D] mm
7. Weight : Approx. 8Kg
Loudspeaker Test Oscillator SG-3428B
Loudspeaker Test Oscillator SG-3428B: overview and buying guide
The Loudspeaker Test Oscillator SG-3428B (model SG-3428B) is made by Sigma Eltec and listed in our test · measurement range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the Loudspeaker Test Oscillator SG-3428B cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the Loudspeaker Test Oscillator SG-3428B to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine Sigma Eltec product?
We purchase directly from Sigma Eltec or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
Introduction:
This Tester Oscillator is used in performing an audible inspection for Rub&Buzz generated from loudspeaker. This equipment works at the auto and manual sweep modes and has a high capacity to classify Rub&Buzz due to its unique low THD.
This equipment provides the optimized environment for inspecting Rub&Buzz due to its function of sweeping out at a time all the frequency range within the bandwidth of audio frequency. It has a function to inspect polarity in it, and the test of sweep can be made in link with that of polarity. It has an embedded circuit with high output, which is used in testing a speaker with low impedance. A built-in high-power circuit for testing a low-impedance (2 Ohm) speaker.
Special Feature:
1. As power amplifier is embedded, you can drive a speaker directly.
2. As it has a low THD of sweep oscillator, it is suitable for testing Rub&Buzz.
3. You can make an accurate setting of start frequency, end frequency and its cycle in the auto sweep mode.
4. A timer-type protection circuit is embedded in order to protect the output terminal from short circuit.
5. Remote control method is used in operating it both in sweep mode and in polarity mode. (Foot S/W)
6. You can drive directly a speaker with 2 ohm of low impedance.
7. When an optional filter is attached, the output may come only from the restricted frequency bandwidth.
Option Filter:
Band Pass Filter
Specification:
1. Frequency Range : 10Hz ~ 30KHz
2. Total Harmonics Distortion (THD) : 0.08% (at 1KHz)
3. Level Flatness : +/-0.07dB (at 20Hz to 20KHz)
4. RMS Power : 2 ohm/50W, 4 ohm/20W, 8 ohm/20W
5. Power Requirements : 220V 50/60Hz
6. Dimensions : 308[W] × 140[H] × 302[D] mm
7. Weight : Approx. 8Kg
