FSW Clamping System
FSW clamping jig
Clamping system has a huge impact on your weld quality and production rate, so we offer you our know-how for jig design.
Each clamping jig is unique, and requires a high expertise that we are able to provide.
How to clamp your parts during a FSW process?
We first design and manufacture a backing (anvil) that is placed under the part during FSW to support FSW vertical load.
Then we design and manufacture the clamping system to hold the part during welding, providing a 3-axis blocking: a good clamping system permits to avoid part opening, dragging and lifting, which is essential for a good weld quality.
There is a risk that the parts can break or collapse if the forging force is not well handled. The backing of the clamping jig must resist the heat generated by the welding. The right choice of the backing material is key.
The mechanical stops are designed in order to avoid the parts to slip and/or diverge during the Friction Stir Welding process. Moreover, specifics clamps also are put in place to deal with the eventual lifting of the parts.
Example of welding jig (12-mm AA6061 welding)
| Example of clamping system on a special FSW machine designed for large thicknesses | A clamping system designed to conceive a 12 mm thick, 3 metre long workpiece by FSW. Three parts are clamped on the clamping jig, which is clamped to the machine table, then two welds are carried out. The two main elements of the clamping system are: Welded mechanical bridges They allow the part to be pressed against the anvil and the jig during welding. We have a bridge on each side to press on the part at the level of the 2 welds to be made. Mechanical stops These hold the parts on the sides to prevent them from moving in the x- and y-axis and avoid gaps between the parts during friction stir welding. |
There are two clamping system types :
|
Manual Small batches and prototypes | Automatic Large series |
Automatic jig
Detailed specification sheets are shown in the product images.
FSW Clamping System
FSW Clamping System: overview and buying guide
The FSW Clamping System is made by STIRWELD and listed in our processing · welding range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the FSW Clamping System cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the FSW Clamping System to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine STIRWELD product?
We purchase directly from STIRWELD or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
FSW clamping jig
Clamping system has a huge impact on your weld quality and production rate, so we offer you our know-how for jig design.
Each clamping jig is unique, and requires a high expertise that we are able to provide.
How to clamp your parts during a FSW process?
We first design and manufacture a backing (anvil) that is placed under the part during FSW to support FSW vertical load.
Then we design and manufacture the clamping system to hold the part during welding, providing a 3-axis blocking: a good clamping system permits to avoid part opening, dragging and lifting, which is essential for a good weld quality.
There is a risk that the parts can break or collapse if the forging force is not well handled. The backing of the clamping jig must resist the heat generated by the welding. The right choice of the backing material is key.
The mechanical stops are designed in order to avoid the parts to slip and/or diverge during the Friction Stir Welding process. Moreover, specifics clamps also are put in place to deal with the eventual lifting of the parts.
Example of welding jig (12-mm AA6061 welding)
| Example of clamping system on a special FSW machine designed for large thicknesses | A clamping system designed to conceive a 12 mm thick, 3 metre long workpiece by FSW. Three parts are clamped on the clamping jig, which is clamped to the machine table, then two welds are carried out. The two main elements of the clamping system are: Welded mechanical bridges They allow the part to be pressed against the anvil and the jig during welding. We have a bridge on each side to press on the part at the level of the 2 welds to be made. Mechanical stops These hold the parts on the sides to prevent them from moving in the x- and y-axis and avoid gaps between the parts during friction stir welding. |
There are two clamping system types :
|
Manual Small batches and prototypes | Automatic Large series |
Automatic jig
Detailed specification sheets are shown in the product images.






