Electromagnetic Vibrators Series MS
New

Electromagnetic Vibrators Series MS

The electromagnetic vibrators generate linear motions and are operated at motions frequencies of 50 and 25 Hz or at 60 and 30 Hz.

Conveying, dosing, drawing off MS drive units are used in various industries for medium duty dosing, draw-off and conveying applications. The drive units are also suitable for clock cycle operation because the maximum motion amplitude is reached as soon as it is started and it comes to a stop immediately after being switched off. Continuous control The motion amplitude can be continuously controlled during the operation of all JVM® electromagnetic vibrators. Therefore the feed rate can be easily adjusted to the current requirements. We have summarised information on the required thyristor controller on page 25.
Operational reliability Tried-and-tested, reliable engineering together with robust, practical field-tested designs provide high operational reliability, even under the most difficult conditions in central lines. All MS electromagnetic vibrators are EMC-compatible. Flexibility In order to allow the motion frequency to be changed after installation, the drives have been designed in such a way that they are interchangeable within a construction size in the motion frequencies.

Dimension in mm

Maintenance-free

The use of high-quality components means that JVM® electromagnetic vibrators are maintenance-free and easy to install. Special lifting eyes make transport easy, eliminating the need to remove the hoods.

Adapted model series

MS drive units are available in seven sizes, and also in models for higher effective weights at lower motion amplitudes (MS 30...80). This broad range enables the optimum drive to be selected for the particular application requirements.

The data

We would also be happy to provide you with further details or inform you about special models built to your specifications.

Connection Via thyristor controller JT 230/400V
50Hz, 460V 60Hz 
Switch-on time 100% (operating mode S1)
Protection System IP 65 as per EN 60 529
Explosion-proof models ATEX Ⅱ 3 DG cCSAus, UL, CI, I, Div 2 Gr. B, C, D cCSAus, UL, CI, II, Div 1 Gr. E, F, G  
Options Special Voltage and executions

Detailed specification sheets are shown in the product images.

Catalogues

Error product group when enable variant picker

Availability: In stock
Electromagnetic Vibrators Series MS

Electromagnetic Vibrators Series MS

$0.00

Electromagnetic Vibrators Series MS: overview and buying guide

The Electromagnetic Vibrators Series MS (model Series MS) is made by JOEST and listed in our construction · woodworking range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.

Frequently asked questions

How much does the Electromagnetic Vibrators Series MS cost?

Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.

Can you ship the Electromagnetic Vibrators Series MS to my country?

Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.

Is this a genuine JOEST product?

We purchase directly from JOEST or its authorised channels and confirm the model and specifications with the manufacturer before ordering.

What is the minimum order quantity?

For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.

The electromagnetic vibrators generate linear motions and are operated at motions frequencies of 50 and 25 Hz or at 60 and 30 Hz.

Conveying, dosing, drawing off MS drive units are used in various industries for medium duty dosing, draw-off and conveying applications. The drive units are also suitable for clock cycle operation because the maximum motion amplitude is reached as soon as it is started and it comes to a stop immediately after being switched off. Continuous control The motion amplitude can be continuously controlled during the operation of all JVM® electromagnetic vibrators. Therefore the feed rate can be easily adjusted to the current requirements. We have summarised information on the required thyristor controller on page 25.
Operational reliability Tried-and-tested, reliable engineering together with robust, practical field-tested designs provide high operational reliability, even under the most difficult conditions in central lines. All MS electromagnetic vibrators are EMC-compatible. Flexibility In order to allow the motion frequency to be changed after installation, the drives have been designed in such a way that they are interchangeable within a construction size in the motion frequencies.

Dimension in mm

Maintenance-free

The use of high-quality components means that JVM® electromagnetic vibrators are maintenance-free and easy to install. Special lifting eyes make transport easy, eliminating the need to remove the hoods.

Adapted model series

MS drive units are available in seven sizes, and also in models for higher effective weights at lower motion amplitudes (MS 30...80). This broad range enables the optimum drive to be selected for the particular application requirements.

The data

We would also be happy to provide you with further details or inform you about special models built to your specifications.

Connection Via thyristor controller JT 230/400V
50Hz, 460V 60Hz 
Switch-on time 100% (operating mode S1)
Protection System IP 65 as per EN 60 529
Explosion-proof models ATEX Ⅱ 3 DG cCSAus, UL, CI, I, Div 2 Gr. B, C, D cCSAus, UL, CI, II, Div 1 Gr. E, F, G  
Options Special Voltage and executions

Detailed specification sheets are shown in the product images.

Catalogues