Double Knuckle Transfer Press SDH-KTP
Double Knuckle Transfer Press SDH-KTP
Double Knuckle Transfer Press SDH-KTP
New
Double Knuckle Transfer Press SDH-KTP
Double Knuckle Transfer Press SDH-KTP
Double Knuckle Transfer Press SDH-KTP

Double Knuckle Transfer Press SDH-KTP

The characteristics of SDH-KTP SERIES

- Crank axis and dynamic balance: As a cam-type driving axis made of special steel, it keeps high hardness by adopting high class bearing. High speed rotation and high degree of precision are available; while vibration and noise during high speed rotation are minimized. 

 
- Slide guide: Durability is reinforced by adopting special high degree of precision linear bearing on slide guide plane. Linear bearing has no vibration and no error in being parallel when slide moves up and down. High degree of precision on eccentric weight is obtained by locating guide plane at the center of press. 

 
- SPM transmission: The speed of SPM varies during press operation dependent on product characteristic. The stop location of bottom dead point, when operation has stopped, changes dependent on the inertia of flywheel. Bottom dead point return after inching is not necessary as an option; therefore, it is always possible to stop at bottom dead point. 

 
- Up-down plunger structure: When blanking and drawing are done simultaneously at no. 1 transfer press process, the product for drawing processing passes the center of mold and transfer hanger is inserted at this time. It happens by the punch working in up-down plunger structure like the transfer. Transfer 

 
- Knock-out structure: There is spring inside when cam moves up and down. In the knock-out structure, transfer hanger holds the product. ⑥ NC trimming structure: It cuts end of drawing product by motor. This trimming device makes the shape of product more smooth and natural. 

 
- Hydraulic type safety device against overload: If the pressure exceeds the set up pressure of overload protector, relief valve immediately engages. If there is coincidental overload during mold installation such as jamming or staggering of mold, faulty control or overlapping of a product, the system automatically stops within 0.1 second to prevent the damage of press or mold. 

 
- Planet gear system: Press capability is greatly increased by achieving high decelerating ratio through adapting gear adoption. It delivers few times of driving force compared to general gear decelerator because it has very big driving force transmission ratio per unit volume. 

model Item unit SDH-45KTP SDH-80KTP SDH-100KTP SDH-400KTP
Capacity Ton 45 80 100 400
Stroke mm 130 180 / 200 280 400
Stroke Per Minute S.P.M 50 35 40 35 spm
120 65 60
Die Height mm 362 510 580 -
Bolster Area mm 1060x300 1400x500 1700x600 4000x1400 

Error product group when enable variant picker

Availability: In stock
Double Knuckle Transfer Press SDH-KTP

Double Knuckle Transfer Press SDH-KTP

$0.00

Double Knuckle Transfer Press SDH-KTP: overview and buying guide

The Double Knuckle Transfer Press SDH-KTP (model SDH-KTP) is made by SAMDO PRESS and listed in our fa (factory automation) range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.

Frequently asked questions

How much does the Double Knuckle Transfer Press SDH-KTP cost?

Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.

Can you ship the Double Knuckle Transfer Press SDH-KTP to my country?

Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.

Is this a genuine SAMDO PRESS product?

We purchase directly from SAMDO PRESS or its authorised channels and confirm the model and specifications with the manufacturer before ordering.

What is the minimum order quantity?

For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.

The characteristics of SDH-KTP SERIES

- Crank axis and dynamic balance: As a cam-type driving axis made of special steel, it keeps high hardness by adopting high class bearing. High speed rotation and high degree of precision are available; while vibration and noise during high speed rotation are minimized. 

 
- Slide guide: Durability is reinforced by adopting special high degree of precision linear bearing on slide guide plane. Linear bearing has no vibration and no error in being parallel when slide moves up and down. High degree of precision on eccentric weight is obtained by locating guide plane at the center of press. 

 
- SPM transmission: The speed of SPM varies during press operation dependent on product characteristic. The stop location of bottom dead point, when operation has stopped, changes dependent on the inertia of flywheel. Bottom dead point return after inching is not necessary as an option; therefore, it is always possible to stop at bottom dead point. 

 
- Up-down plunger structure: When blanking and drawing are done simultaneously at no. 1 transfer press process, the product for drawing processing passes the center of mold and transfer hanger is inserted at this time. It happens by the punch working in up-down plunger structure like the transfer. Transfer 

 
- Knock-out structure: There is spring inside when cam moves up and down. In the knock-out structure, transfer hanger holds the product. ⑥ NC trimming structure: It cuts end of drawing product by motor. This trimming device makes the shape of product more smooth and natural. 

 
- Hydraulic type safety device against overload: If the pressure exceeds the set up pressure of overload protector, relief valve immediately engages. If there is coincidental overload during mold installation such as jamming or staggering of mold, faulty control or overlapping of a product, the system automatically stops within 0.1 second to prevent the damage of press or mold. 

 
- Planet gear system: Press capability is greatly increased by achieving high decelerating ratio through adapting gear adoption. It delivers few times of driving force compared to general gear decelerator because it has very big driving force transmission ratio per unit volume. 

model Item unit SDH-45KTP SDH-80KTP SDH-100KTP SDH-400KTP
Capacity Ton 45 80 100 400
Stroke mm 130 180 / 200 280 400
Stroke Per Minute S.P.M 50 35 40 35 spm
120 65 60
Die Height mm 362 510 580 -
Bolster Area mm 1060x300 1400x500 1700x600 4000x1400