Die-Formed Dynamic Packing ALS 355
Description
Since the graphite molding packing was produced at a certain angle it can get outstanding sealing effect thanks to the low tightening torgue load when assembling and coupling by gland.
The high density graphite molding packing in the upper and lower part will prevent the low density graphite from crack and crushing by rotary and reciprocating.
It guarantees better sealing effects if you use ALS910C and ALS900G depending on the use purpose as end ring.
Service : For use pumps and valves, high temperature and pressure stem valves, soot blower, control valves.
Technical Data
| Pressure | 4600psi (317bar) |
| Chemical Resistance | pH 0 -14 |
| Temperature | From -400℉(-240℃) to 800℉(430℃) in air From -400℉(-240℃) to 5400℉(3000℃) in non oxidizing From -400℉(-240℃) to 800℉(650℃) in steam |
Die-Formed Dynamic Packing ALS 355
Die-Formed Dynamic Packing ALS 355: overview and buying guide
The Die-Formed Dynamic Packing ALS 355 (model ALS 355) is made by DONGSUH and listed in our environment · energy range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the Die-Formed Dynamic Packing ALS 355 cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the Die-Formed Dynamic Packing ALS 355 to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine DONGSUH product?
We purchase directly from DONGSUH or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
Description
Since the graphite molding packing was produced at a certain angle it can get outstanding sealing effect thanks to the low tightening torgue load when assembling and coupling by gland.
The high density graphite molding packing in the upper and lower part will prevent the low density graphite from crack and crushing by rotary and reciprocating.
It guarantees better sealing effects if you use ALS910C and ALS900G depending on the use purpose as end ring.
Service : For use pumps and valves, high temperature and pressure stem valves, soot blower, control valves.
Technical Data
| Pressure | 4600psi (317bar) |
| Chemical Resistance | pH 0 -14 |
| Temperature | From -400℉(-240℃) to 800℉(430℃) in air From -400℉(-240℃) to 5400℉(3000℃) in non oxidizing From -400℉(-240℃) to 800℉(650℃) in steam |
