Defense Industry – illustrative image, not the exact model
New

CruizCore® R1370

The R1370 is a device that combines the gyroscope capabilities of the R1070 and a three-axis accelerometer. The R1370 is a compact, yet very accurate sensing solution. It provides UART and SPI communication interfaces. The R1370 uses MEMS sensors resulting in low-cost and high reliability. The R1370 has a 50 Hz bandwidth and can measure rates up to ± 150 °/sec. The R1370 minimizes the sensor error with the help of an adaptive reduced Kalman filter. The expected error contributed by drift is less than 10 °/h and the scale-factor is accurate within 0.5% of the scale factor. The accelerometer can measure up to ± 2g and can be used to sense robot collisions, detect sudden motion changes or compute tilt when stationary. The R1370 start-up time is less than one second and it does not require further calibration thereafter. Because of its small size and low power consumption, the R1370 is suitable for service robots that require accurate position estimation. It is currently been used by major cleaning robot manufacturers.

ㆍHeading reference for robot-cleaner
ㆍAngle & angular rate output
ㆍ3 axis acceleration output
ㆍUltra low bias drift
ㆍHigh resolution and accuracy
ㆍOutstanding scale factor linearity
ㆍFast start-up
ㆍFully self-contained
ㆍUART digital output
ㆍLow power consumption

Specification

Performance Angle & rate Input dynamic range ± 100 ˚/sec (continuous)
± 150 ˚/sec (instantaneous)
Rate noise (1σ @ 50Hz bandwidth) < 0.1 ˚/sec (typical)
Scale factor nonlinearity 0.5 % (typical)
Bandwidth 50 Hz
Bias drift < 10 ˚/hr (typical)
Acceleration Input dynamic range ± 2g (typiocal), ± 4g, ± 8g
Physical Weight 5 grams
Size 25mm X 20mm X 3.0mm
Electrical Power consumption < 43mW (@3.3V)
Input voltage 3.2 ~ 5.5 V
Output rate 100Hz (10, 25, 50Hz selectable )
Environmental Operating temperature -20 ~ 80 ˚C
Storage temperature -40 ~ 100 ˚C
Shock 200g RMs

Catalogues

Error product group when enable variant picker

Availability: In stock
Defense Industry – illustrative image, not the exact model

CruizCore® R1370

$0.00

CruizCore® R1370: overview and buying guide

The CruizCore® R1370 (model R1370) is made by Microinfinity and listed in our defense industry range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.

Frequently asked questions

How much does the CruizCore® R1370 cost?

Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.

Can you ship the CruizCore® R1370 to my country?

Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.

Is this a genuine Microinfinity product?

We purchase directly from Microinfinity or its authorised channels and confirm the model and specifications with the manufacturer before ordering.

What is the minimum order quantity?

For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.

The R1370 is a device that combines the gyroscope capabilities of the R1070 and a three-axis accelerometer. The R1370 is a compact, yet very accurate sensing solution. It provides UART and SPI communication interfaces. The R1370 uses MEMS sensors resulting in low-cost and high reliability. The R1370 has a 50 Hz bandwidth and can measure rates up to ± 150 °/sec. The R1370 minimizes the sensor error with the help of an adaptive reduced Kalman filter. The expected error contributed by drift is less than 10 °/h and the scale-factor is accurate within 0.5% of the scale factor. The accelerometer can measure up to ± 2g and can be used to sense robot collisions, detect sudden motion changes or compute tilt when stationary. The R1370 start-up time is less than one second and it does not require further calibration thereafter. Because of its small size and low power consumption, the R1370 is suitable for service robots that require accurate position estimation. It is currently been used by major cleaning robot manufacturers.

ㆍHeading reference for robot-cleaner
ㆍAngle & angular rate output
ㆍ3 axis acceleration output
ㆍUltra low bias drift
ㆍHigh resolution and accuracy
ㆍOutstanding scale factor linearity
ㆍFast start-up
ㆍFully self-contained
ㆍUART digital output
ㆍLow power consumption

Specification

Performance Angle & rate Input dynamic range ± 100 ˚/sec (continuous)
± 150 ˚/sec (instantaneous)
Rate noise (1σ @ 50Hz bandwidth) < 0.1 ˚/sec (typical)
Scale factor nonlinearity 0.5 % (typical)
Bandwidth 50 Hz
Bias drift < 10 ˚/hr (typical)
Acceleration Input dynamic range ± 2g (typiocal), ± 4g, ± 8g
Physical Weight 5 grams
Size 25mm X 20mm X 3.0mm
Electrical Power consumption < 43mW (@3.3V)
Input voltage 3.2 ~ 5.5 V
Output rate 100Hz (10, 25, 50Hz selectable )
Environmental Operating temperature -20 ~ 80 ˚C
Storage temperature -40 ~ 100 ˚C
Shock 200g RMs

Catalogues