Control Panel SICON-4000DZi
SICON-4000DZi is a leading-edge elevator control panel with hughly enhanced features by using advanced software programming technology and high speed dual DSP. Controller is comprised of inverter and mainboard as a simple unit.
It doesn't need to adjust manually slowing down length because of built in PPM calibration.It supports special company code for easy maintenance.
Specification
| Power | 3-Phase 200v / 380v / 415v / 440v |
| Frequency | 50/60Hz |
| Nos. of stop | 64 Stops |
| Speed | 45~240m/min |
| Control Type | Rope type (Inverter) |
| Speed Reduction | Encoder (500~8192Pluse) |
| Display | Dot Matrix. / LCD |
| Group | 8 Car |
| Usage | Passenger / Freight |
| Motor Type | PMSM, IM |
Inverter rated current
| KwPower | 5.5Kw | 7.5 | 11Kw | 15Kw | 22Kw | 30Kw | 37Kw | 45Kw | 55Kw |
| 200V | 27A | 37.3A | 49.5A | 73A | 93A | - | - | - | - |
| 380V | 17A | 17A | 24.7A | 34A | 47A | 64A | 78.7A | 93.2A | 116.2A |
Feature
- It can control up to 64 stops (for high raiser)
- It can control up to 240m/mim (for high speed)
(Reference site: Menara ING building in Kuala Lumpur Malaysia)
- Excellent Energy -Electric Power saving and Harmonic distortion reduction by applying ReGen Drive System.
- Built in Parameter for 2 Car parallel operation setting
ㆍUser can set by building’s operating conditions
ㆍImproved communication speed and stability by use of CAN communication
- It can control “Destination Dispatch Control System”
(A best suitable lift among the lifts in group operation is dispatched when passenger registers the destination floor at the landing floor)
- Applied high speed dual DSP 32bit
ㆍ Various functions (various monitoring functions, failure detection record functions, etc)
- It can operate by A/B encoder’s signal only when using PMS Motor
ㆍBuilt-in magnetic detection algorithm for PMS Motor by A/B encoder’s signal
ㆍ Operating by parameter settings without lock-in procedure
- There are two types operator, so user can choose one
ㆍ Fixing type by supporter on the Main PCB (LCD + 9 keys)(non-detachable)
ㆍUsing OPP-4000 unit (handheld type)
- Built in PPM Calibration function for Auto deceleration distance calculation
ㆍ It is easy to install at jobsite
ㆍNo need to adjust deceleration distance manually after change parameter
- Built in Safety line grounding detection function
- Applied Sin / Cos encoder as well as UVW encoder
Control Panel SICON-4000DZi
Control Panel SICON-4000DZi: overview and buying guide
The Control Panel SICON-4000DZi (model SICON-4000DZi) is made by SAMIL ELTEC and listed in our electronic range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the Control Panel SICON-4000DZi cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the Control Panel SICON-4000DZi to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine SAMIL ELTEC product?
We purchase directly from SAMIL ELTEC or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
SICON-4000DZi is a leading-edge elevator control panel with hughly enhanced features by using advanced software programming technology and high speed dual DSP. Controller is comprised of inverter and mainboard as a simple unit.
It doesn't need to adjust manually slowing down length because of built in PPM calibration.It supports special company code for easy maintenance.
Specification
| Power | 3-Phase 200v / 380v / 415v / 440v |
| Frequency | 50/60Hz |
| Nos. of stop | 64 Stops |
| Speed | 45~240m/min |
| Control Type | Rope type (Inverter) |
| Speed Reduction | Encoder (500~8192Pluse) |
| Display | Dot Matrix. / LCD |
| Group | 8 Car |
| Usage | Passenger / Freight |
| Motor Type | PMSM, IM |
Inverter rated current
| KwPower | 5.5Kw | 7.5 | 11Kw | 15Kw | 22Kw | 30Kw | 37Kw | 45Kw | 55Kw |
| 200V | 27A | 37.3A | 49.5A | 73A | 93A | - | - | - | - |
| 380V | 17A | 17A | 24.7A | 34A | 47A | 64A | 78.7A | 93.2A | 116.2A |
Feature
- It can control up to 64 stops (for high raiser)
- It can control up to 240m/mim (for high speed)
(Reference site: Menara ING building in Kuala Lumpur Malaysia)
- Excellent Energy -Electric Power saving and Harmonic distortion reduction by applying ReGen Drive System.
- Built in Parameter for 2 Car parallel operation setting
ㆍUser can set by building’s operating conditions
ㆍImproved communication speed and stability by use of CAN communication
- It can control “Destination Dispatch Control System”
(A best suitable lift among the lifts in group operation is dispatched when passenger registers the destination floor at the landing floor)
- Applied high speed dual DSP 32bit
ㆍ Various functions (various monitoring functions, failure detection record functions, etc)
- It can operate by A/B encoder’s signal only when using PMS Motor
ㆍBuilt-in magnetic detection algorithm for PMS Motor by A/B encoder’s signal
ㆍ Operating by parameter settings without lock-in procedure
- There are two types operator, so user can choose one
ㆍ Fixing type by supporter on the Main PCB (LCD + 9 keys)(non-detachable)
ㆍUsing OPP-4000 unit (handheld type)
- Built in PPM Calibration function for Auto deceleration distance calculation
ㆍ It is easy to install at jobsite
ㆍNo need to adjust deceleration distance manually after change parameter
- Built in Safety line grounding detection function
- Applied Sin / Cos encoder as well as UVW encoder
