Audio/Sound Analyzer SG-5321A
Introduction:
This signal analyzing equipment enables us to conduct a simultaneous measurement for frequency response generated from loud speaker, SPL, impedance, Fo, Ze, THD, Phase, polarity, and Rub & Buzz. High-frequency signal analysis offers even more accurate testing and identification of Rub&Buzz than existing hearing tests. The algorithm of signal analysis applied to this device allows to detect even minute Rub & Buzz due to its innovative and new method. The 4-stage defect setting enables even more in-depth assessment.
Special Feature:
1. Simultaneous measurement and assessment of Frequency Response (SPL), Impedance, Fo, Ze, THD, Phase, Polarity,
and Rub & Buzz.
2. High performance SNR>100dB.
3. Sampling rate up to 96kHz
4. Auto calibration : Microphone. Output voltage.
5. 4-stage pass/fail grade setting and management
6. Self-test supported for the hardware system
7. Computer-controlled operation Fast, hot plug USB interface.
8. Records measurement data in a file, calculate and conduct statistical processing (SPC) regarding the Avg, Min, Max, Cp,
and Cpk of SPL, Fo, Ze, THD (4-point), Rub & Buzz (4-point).
9. Can perform remote control through the Internet.
10. Easy document printing in MS Word or Excel file (text format only)
11. MIC Pre-Amp, Conditioning Amp, Power Amp System control. Remote control.
12. The comparative measurement can be made for the properties of several speakers. (Comparison)
13. The simulated measurement can be made for the changes of properties made in THD andRub&Buzz according to the
change of voltage given. (Simulation)
14. The existing standard microphone (B&K) can be used without any change, since the input terminal has the structure of standard LEMO 7-pin connector.
Option-01A:
Once connected to the automation system, outputs separate signals divided into 4 classes of pass or fail for all measurement items.
Specification:
1. Sweep Analyzer Level Flatness
50Hz - 20kHz <± 0.1 dB.
20Hz - 20kHz <± 0.2 dB.
15Hz - 40kHz <± 0.5 dB.
2. Chirp Analyzer ( Rub&Buzz Sound Correlation )
20Hz - 6kHz <± 0.1 dB.
15Hz - 6kHz <± 0.5 dB.
3. Sweep
Log : 1/1,1/3,1/6,1/12,1/24,1/48 Octave steps.
Lin : 1 to 2000 steps.
4. Preamp. Input
Via standard LEMO 7-Pin Connector
B&K Connector
Input Impedance : 1 MΩ/100pF
Polarization Voltage : 200V
Power supply : ±15V
5. Power Amp
Output : 10mv - 10.00v RMS.
Max power : 8W - at 8 ohms
6. Standard software
Audio Analyzer Production software
CD (based Windows® XP, Vista, W7)
Pentium®4, 1.5GHz processor minimum or equivalent.
(Celeron processors are not recommended)
7. Interface Bus
Personal computer connected to the instrument
through the Audio Analyzer Interface Bus. (USB2.0)
8. Remote control interfaces
15P D-Type connector I/O signal - Start, Pass, Fail,
Fail [Class1, Class2, Class3, Class4]
SPL Analyzer ON. Rub & Buzz Analyzer ON .
Remote control I/O ※ Terminal Box [Option 01A]
9. Power Requirements
AC 220V 50/60Hz 90VA
10. Dimensions
300(W) * 115(H) * 255(D) mm
11. Weight
Approx. 4.2Kg
Detailed specification sheets are shown in the product images.
Audio/Sound Analyzer SG-5321A
Audio/Sound Analyzer SG-5321A: overview and buying guide
The Audio/Sound Analyzer SG-5321A (model SG-5321A) is made by Sigma Eltec and listed in our test · measurement range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the Audio/Sound Analyzer SG-5321A cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the Audio/Sound Analyzer SG-5321A to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine Sigma Eltec product?
We purchase directly from Sigma Eltec or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
Introduction:
This signal analyzing equipment enables us to conduct a simultaneous measurement for frequency response generated from loud speaker, SPL, impedance, Fo, Ze, THD, Phase, polarity, and Rub & Buzz. High-frequency signal analysis offers even more accurate testing and identification of Rub&Buzz than existing hearing tests. The algorithm of signal analysis applied to this device allows to detect even minute Rub & Buzz due to its innovative and new method. The 4-stage defect setting enables even more in-depth assessment.
Special Feature:
1. Simultaneous measurement and assessment of Frequency Response (SPL), Impedance, Fo, Ze, THD, Phase, Polarity,
and Rub & Buzz.
2. High performance SNR>100dB.
3. Sampling rate up to 96kHz
4. Auto calibration : Microphone. Output voltage.
5. 4-stage pass/fail grade setting and management
6. Self-test supported for the hardware system
7. Computer-controlled operation Fast, hot plug USB interface.
8. Records measurement data in a file, calculate and conduct statistical processing (SPC) regarding the Avg, Min, Max, Cp,
and Cpk of SPL, Fo, Ze, THD (4-point), Rub & Buzz (4-point).
9. Can perform remote control through the Internet.
10. Easy document printing in MS Word or Excel file (text format only)
11. MIC Pre-Amp, Conditioning Amp, Power Amp System control. Remote control.
12. The comparative measurement can be made for the properties of several speakers. (Comparison)
13. The simulated measurement can be made for the changes of properties made in THD andRub&Buzz according to the
change of voltage given. (Simulation)
14. The existing standard microphone (B&K) can be used without any change, since the input terminal has the structure of standard LEMO 7-pin connector.
Option-01A:
Once connected to the automation system, outputs separate signals divided into 4 classes of pass or fail for all measurement items.
Specification:
1. Sweep Analyzer Level Flatness
50Hz - 20kHz <± 0.1 dB.
20Hz - 20kHz <± 0.2 dB.
15Hz - 40kHz <± 0.5 dB.
2. Chirp Analyzer ( Rub&Buzz Sound Correlation )
20Hz - 6kHz <± 0.1 dB.
15Hz - 6kHz <± 0.5 dB.
3. Sweep
Log : 1/1,1/3,1/6,1/12,1/24,1/48 Octave steps.
Lin : 1 to 2000 steps.
4. Preamp. Input
Via standard LEMO 7-Pin Connector
B&K Connector
Input Impedance : 1 MΩ/100pF
Polarization Voltage : 200V
Power supply : ±15V
5. Power Amp
Output : 10mv - 10.00v RMS.
Max power : 8W - at 8 ohms
6. Standard software
Audio Analyzer Production software
CD (based Windows® XP, Vista, W7)
Pentium®4, 1.5GHz processor minimum or equivalent.
(Celeron processors are not recommended)
7. Interface Bus
Personal computer connected to the instrument
through the Audio Analyzer Interface Bus. (USB2.0)
8. Remote control interfaces
15P D-Type connector I/O signal - Start, Pass, Fail,
Fail [Class1, Class2, Class3, Class4]
SPL Analyzer ON. Rub & Buzz Analyzer ON .
Remote control I/O ※ Terminal Box [Option 01A]
9. Power Requirements
AC 220V 50/60Hz 90VA
10. Dimensions
300(W) * 115(H) * 255(D) mm
11. Weight
Approx. 4.2Kg
Detailed specification sheets are shown in the product images.



