Active Carbon Tower CAC Series
Active Carbon Tower CAC Series
Active Carbon Tower CAC Series
Active Carbon Tower CAC Series
New
Active Carbon Tower CAC Series
Active Carbon Tower CAC Series
Active Carbon Tower CAC Series
Active Carbon Tower CAC Series

Active Carbon Tower CAC Series

Active Carbon Tower

Filte: Adsorbents (Activated Carbon, Zeolide, Silica Gel, Alumina, Etc)

Cleaning: Adsorbent Replacement Type

Purpose: Volatile Organic Compounds and Odor Removal

Product Introduction

The Active Carbon Tower is an air pollution control facility that adsorbs high concentrations of volatile organic compounds (VOCs) onto activated carbon to remove them.

This device inhales volatile organic compounds and passes them through the inside of the carbon-filled adsorption tower to eliminate them. It is particularly useful when the gaseous pollutants are non-combustible or when the concentration of pollutants is low, and it can also remove odors.

Depending on the type and characteristics of the pollutants, adsorbents other than activated carbon, such as zeolite, silica gel, and alumina, can be used, making it applicable in various work environments.

Key Features

Uses a large amount of activated carbon to purify air

  • Physically and chemically absorbs and adsorbs VOCs and odors by passing them through equipment filled with activated carbon.

  • Activated carbon is a carbonaceous material made from the shells of palm fruits chemically and physically heat-treated at 600-900C, having an internal surface area of about 1,200 m2 per gram.

  • Due to its excellent adsorptive properties through its internal surface area, activated carbon is commonly used for air purification.

Key Design Factors

  • The design ensures that gases drawn into the adsorption tower pass through the activated carbon at an average velocity of 0.3-0.5 m/sec, ensuring that gases remain in contact with the activated carbon for at least 1.0 sec.

  • If dust, moisture, or corrosive substances are present in the gas, they are first removed in a separate pretreatment facility before being introduced into the adsorption tower.

  • If the temperature is high, desorption of the adsorbed pollutants from the activated carbon occurs, so if the gas temperature exceeds 54C, it must be cooled below 40℃ using a heat exchanger.

  • Adsorbents other than activated carbon can be used, selecting the appropriate one based on the type and characteristics of the gaseous pollutants.

Application

  • Facilities using organic solvents, paint facilities, semiconductor factories, PCB factories, plating factories, food factories, paint manufacturing, printing plants, petrochemical factories, wastewater treatment plants and other gas emission facilities

  • Air pollutant emission facilities subject to environmental permits and licenses

  • Businesses required to submit hazardous risk prevention plans

Detailed specification sheets are shown in the product images.

Error product group when enable variant picker

Availability: In stock
Active Carbon Tower CAC Series

Active Carbon Tower CAC Series

$0.00

Active Carbon Tower CAC Series: overview and buying guide

The Active Carbon Tower CAC Series (model CAC Series) is made by CleanAirTech and listed in our hvac range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.

Frequently asked questions

How much does the Active Carbon Tower CAC Series cost?

Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.

Can you ship the Active Carbon Tower CAC Series to my country?

Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.

Is this a genuine CleanAirTech product?

We purchase directly from CleanAirTech or its authorised channels and confirm the model and specifications with the manufacturer before ordering.

What is the minimum order quantity?

For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.

Active Carbon Tower

Filte: Adsorbents (Activated Carbon, Zeolide, Silica Gel, Alumina, Etc)

Cleaning: Adsorbent Replacement Type

Purpose: Volatile Organic Compounds and Odor Removal

Product Introduction

The Active Carbon Tower is an air pollution control facility that adsorbs high concentrations of volatile organic compounds (VOCs) onto activated carbon to remove them.

This device inhales volatile organic compounds and passes them through the inside of the carbon-filled adsorption tower to eliminate them. It is particularly useful when the gaseous pollutants are non-combustible or when the concentration of pollutants is low, and it can also remove odors.

Depending on the type and characteristics of the pollutants, adsorbents other than activated carbon, such as zeolite, silica gel, and alumina, can be used, making it applicable in various work environments.

Key Features

Uses a large amount of activated carbon to purify air

  • Physically and chemically absorbs and adsorbs VOCs and odors by passing them through equipment filled with activated carbon.

  • Activated carbon is a carbonaceous material made from the shells of palm fruits chemically and physically heat-treated at 600-900C, having an internal surface area of about 1,200 m2 per gram.

  • Due to its excellent adsorptive properties through its internal surface area, activated carbon is commonly used for air purification.

Key Design Factors

  • The design ensures that gases drawn into the adsorption tower pass through the activated carbon at an average velocity of 0.3-0.5 m/sec, ensuring that gases remain in contact with the activated carbon for at least 1.0 sec.

  • If dust, moisture, or corrosive substances are present in the gas, they are first removed in a separate pretreatment facility before being introduced into the adsorption tower.

  • If the temperature is high, desorption of the adsorbed pollutants from the activated carbon occurs, so if the gas temperature exceeds 54C, it must be cooled below 40℃ using a heat exchanger.

  • Adsorbents other than activated carbon can be used, selecting the appropriate one based on the type and characteristics of the gaseous pollutants.

Application

  • Facilities using organic solvents, paint facilities, semiconductor factories, PCB factories, plating factories, food factories, paint manufacturing, printing plants, petrochemical factories, wastewater treatment plants and other gas emission facilities

  • Air pollutant emission facilities subject to environmental permits and licenses

  • Businesses required to submit hazardous risk prevention plans

Detailed specification sheets are shown in the product images.