PMOLED Driver IC
PM(Passive Matrix)OLED is dot matrix type OLED. It is suitable for sub-display of mobile phone & small size display because of its low manufacturing cost.
LDT has various product line-up to meet customer’s requirement. We are world no1 provider of PMOLED driver IC.
LD7032
Power Supply
- VDD : 1.65 ~ 3.5V
- VCC_C : 8.0 ~ 16.0V for Column
- VCC_R : 8.0 ~ 16.0V for Row
Display Area
- Max 128 x 40 Line
Graphics RAM
- Dot matrix : 128 x 1 Bit x 40 = 5,120 Bit
Column Driver
- Max 128 Outputs
- Mono
- Maximum Output Current = 255 uA (1 uA Step)
- Next Pin to Pin Current Deviation ±2.0 (Iout = 50uA)
- Current Deviation at 1Chip Max-Min ±4.0 % (Iout = 50uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 50uA)
- 5 Times Peak boot Current Driving
Row Driver
- Max 40 Outputs
- Variable duty ratio (1 to 40)
- ON resistance typical 25ohm
CPU Interface
- 8080 or 6800 series parallel interface
- Serial Peripheral Interface
- I2C Serial Interface
Screen Saver
- Screen Saver Function.
Oscillator
- On-chip RC oscillator
Frame Rate
- Variable Frame Rate (60,75,90,105,120,135)Hz
Crosstalk
- Crosstalk enhancement function (Patent registered )
Internal regulator for row driver
- Selectable Voltage Function. ( 0.8*VCC_C or 0.7*VCC_C )
LD7034
Power Supply
- VDD : 2.5 ~ 5.5V
- VCC_C : 8.0 ~ 18.0V for Column ( VCC_C ≥ VCC_R )
- VCC_R : 8.0 ~ 18.0V for Row ( VCC_C ≥ VCC_R )
Display Area
- Max 256 x 64 Line
Graphics RAM
- Dot matrix : 256 x 4 Bit x 64 = 65,536 Bit
Column Driver
- Max 256 Outputs
- 16-Gray Scale (PWM : Gamma Function 256 Step)
- Maximum Data Output Current = 510 uA (2uA Step)
- Maximum Peak Output Current = 992 uA (32uA Step)
- Next Pin to Pin Current Deviation ±2.0% (Iout = 100uA)
- Current Deviation at 1Chip Max-Min ±4.0 % (Iout = 100uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 100uA)
Row Driver
- Max 64 Outputs
- Variable duty ratio (1 to 64)
- ON resistance typical 20Ω
CPU Interface
- 8080 or 6800 series parallel interface
- Serial Peripheral Interface
- I2C Serial Interface
On-chip Oscillator
- Internal Resistor Oscillation Mode
Frame Rate
- Programmable Frame Rate (60,75,90,105,120)Hz
Frame Rate
- Programmable Frame Rate (60,75,90,105,120)Hz
Internal regulator for row driver
- Selectable Voltage Function. ( VCC_R = 0.8*VCC_C or 0.7*VCC_C : 2-step )
LD7038
Power Supply
- VDD : 1.65 ~ 3.3V
- VCC_C : 8.0 ~ 18.0V for Column
- VCC_R : 8.0 ~ 18.0V for Row
Display Area
- Max 128 x 128 Line
Graphics RAM
- Dot matrix : 128 x 4 Bit x 128 = 65,536 Bit
Column Driver
- Max 128 Outputs
- 16Gray
- Maximum Output Current = 255 uA (1 uA Step)
- Next Pin to Pin Current Deviation ±2.0 (Iout = 50uA)
- Current Deviation at 1Chip Max-Min ±4.0 % (Iout = 50uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 50uA)
- 5 Times Peak boot Current Driving
Row Driver
- Max 128 Outputs
- Variable duty ratio (1 to 128)
- ON resistance typical 25ohm
CPU Interface
- 8080 or 6800 series parallel interface
- Serial Peripheral Interface
- I2C Serial Interface
Oscillator
- On-chip RC oscillator
Frame Rate
- Variable Frame Rate (60,75,90,105,120)Hz
Internal regulator for row driver
- Selectable Voltage Function. ( 0.85*VCC_C ~ 0.65*VCC_C )
LD7040
Power Supply
- VDD : 1.65 ~ 3.3V
- VCC_C : 8.0 ~ 15.0V for Column
- VCC_R : 8.0 ~ 15.0V for Row
Display Area
- Max 128 x 64 Line
Graphics RAM
- Dot matrix : 128 x 1 Bit x 64 = 8192 Bit
Column Driver
- Max 128 Outputs
- Mono
- Maximum Output Current = 255 uA (1 uA Step)
- Next Pin to Pin Current Deviation ±2.0 (Iout = 50uA)
- Current Deviation at 1Chip Max-Min ±4.0 % (Iout = 50uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 50uA)
- 5 Times Peak boot Current Driving
Row Driver
- Max 64 Outputs
- Variable duty ratio (1 to 64)
- ON resistance typical 25ohm
CPU Interface
- 8080 or 6800 series parallel interface
- Serial Peripheral Interface
- I2C Serial Interface
Screen Saver
- Screen Saver Function.
Oscillator
- On-chip RC oscillator
Frame Rate
- Variable Frame Rate (60,75,90,105,120)Hz
Crosstalk
- Crosstalk enhancement function
Internal regulator for row driver
- Selectable Voltage Function. ( 0.8*VCC_C or 0.7*VCC_C )
LD7044
Power Supply
- VDD : 1.65 ~ 3.5V Interface Power, Logic and Analog Power
- VAH : 8.0 ~ 16.0V for Anode
- VKH : 8.0 ~ 16.0V for Cathode
Display Area
- Max 96 x 8Line
Graphics RAM
- Dot matrix :96 x 8bit x 8 =6,144Bit
AnodeDriver
- Max 96Outputs
- MaximumDataOutput Current = 306uA (1.2uA Step)
- Next Pin to Pin Current Deviation ±2% (Iout = 100uA)
- Current Deviation at 1Chip Max-Min ±4%(Iout = 100uA)
- Average Current Deviation against absolute level ±6.0%(Iout = 100uA)
Cathode Driver
- Max 8Outputs
- ON resistance typical 20Ω
CPU Interface
- Serial Peripheral Interface, I2C Interface
On-chip Oscillator
- Internal RC Oscillation
Driving Method
- PWM (Gray Level is controlled by Pulse Width)
LD7134
Power Supply
- VCC_C = 8 ~ 18V
- VDD = 1.65 ~ 3.3V
Display Area
- Max. 96(RGB) x 96 (Pixel) for 65K Color
Graphics RAM
- Dot matrix : 96x16 Bitx96=147,456 Bit
Column Driver
- Max 96(RGB) Outputs
- 65K Color
- Maximum Output Current = 255uA (1uA Step), Maximum Peak Current = 1008uA (16 Step)
- Next Pin to Pin Current Deviation±2.0% (Iout = 100uA)
- Current Deviation at 1Chip Max-Min ±4.0% (Iout = 100uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 100uA)
Row Driver
- Max. 96 Outputs
- Variable duty ratio (1 to 96)
- ON resistance typical 25ohm (Max. 40ohm)
CPU Interface
8bit Write and Read
- Address A0 is used to select command and parameter (data)
- Selectable 68/80 series parallel bus or serial interface
- Parallel I/F : write cycle 10MHz
- read cycle 2MHz
- Serial I/F : serial clock 10MHz when write mode,
- serial clock 2MHz when read mode
Advanced Display Features
- Adjustable Frame Frequency (60Hz ~ 120Hz).
- Internal Regulator for Row Driver.
- Color Mode & Gray Mode (288 x 96 Resolution)
- Oscillator & Reference resistor is internal.
LD7138
Power Supply
- VCC_C = 8 ~ 18V
- VDD = 1.65 ~ 3.3V
Display Area
- Max. 128(RGB) x 128 (Pixel) for 65K Color
Graphics RAM
- Dot matrix : 128x16 Bitx128=262,144 Bit
Column Driver
- Max 128(RGB) Outputs
- 65K Color
- Maximum Output Current = 255uA (1uA Step), Maximum Peak Current = 1008uA (16 Step)
- Next Pin to Pin Current Deviation±2.0% (Iout = 100uA)
- Current Deviation at 1Chip Max-Min ±4.0% (Iout = 100uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 100uA)
Row Driver
- Max. 128 Outputs
- Variable duty ratio (1 to 128)
- ON resistance typical 25ohm (Max. 40ohm)
CPU Interface
8bit Write and Read
- Address A0 is used to select command and parameter (data)
- Selectable 68/80 series parallel bus or serial interface
- Parallel I/F : write cycle 10MHz
- read cycle 2MHz
- Serial I/F : serial clock 10MHz when write mode,
- serial clock 2MHz when read mode
Advanced Display Features
- Adjustable Frame Frequency (60Hz ~ 120Hz).
- Internal Regulator for Row Driver.
- Oscillator & Reference resistor is internal.
Detailed specification sheets are shown in the product images.
PMOLED Driver IC
PMOLED Driver IC: overview and buying guide
The PMOLED Driver IC is made by LDT and listed in our semiconductor · display range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the PMOLED Driver IC cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the PMOLED Driver IC to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine LDT product?
We purchase directly from LDT or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
PM(Passive Matrix)OLED is dot matrix type OLED. It is suitable for sub-display of mobile phone & small size display because of its low manufacturing cost.
LDT has various product line-up to meet customer’s requirement. We are world no1 provider of PMOLED driver IC.
LD7032
Power Supply
- VDD : 1.65 ~ 3.5V
- VCC_C : 8.0 ~ 16.0V for Column
- VCC_R : 8.0 ~ 16.0V for Row
Display Area
- Max 128 x 40 Line
Graphics RAM
- Dot matrix : 128 x 1 Bit x 40 = 5,120 Bit
Column Driver
- Max 128 Outputs
- Mono
- Maximum Output Current = 255 uA (1 uA Step)
- Next Pin to Pin Current Deviation ±2.0 (Iout = 50uA)
- Current Deviation at 1Chip Max-Min ±4.0 % (Iout = 50uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 50uA)
- 5 Times Peak boot Current Driving
Row Driver
- Max 40 Outputs
- Variable duty ratio (1 to 40)
- ON resistance typical 25ohm
CPU Interface
- 8080 or 6800 series parallel interface
- Serial Peripheral Interface
- I2C Serial Interface
Screen Saver
- Screen Saver Function.
Oscillator
- On-chip RC oscillator
Frame Rate
- Variable Frame Rate (60,75,90,105,120,135)Hz
Crosstalk
- Crosstalk enhancement function (Patent registered )
Internal regulator for row driver
- Selectable Voltage Function. ( 0.8*VCC_C or 0.7*VCC_C )
LD7034
Power Supply
- VDD : 2.5 ~ 5.5V
- VCC_C : 8.0 ~ 18.0V for Column ( VCC_C ≥ VCC_R )
- VCC_R : 8.0 ~ 18.0V for Row ( VCC_C ≥ VCC_R )
Display Area
- Max 256 x 64 Line
Graphics RAM
- Dot matrix : 256 x 4 Bit x 64 = 65,536 Bit
Column Driver
- Max 256 Outputs
- 16-Gray Scale (PWM : Gamma Function 256 Step)
- Maximum Data Output Current = 510 uA (2uA Step)
- Maximum Peak Output Current = 992 uA (32uA Step)
- Next Pin to Pin Current Deviation ±2.0% (Iout = 100uA)
- Current Deviation at 1Chip Max-Min ±4.0 % (Iout = 100uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 100uA)
Row Driver
- Max 64 Outputs
- Variable duty ratio (1 to 64)
- ON resistance typical 20Ω
CPU Interface
- 8080 or 6800 series parallel interface
- Serial Peripheral Interface
- I2C Serial Interface
On-chip Oscillator
- Internal Resistor Oscillation Mode
Frame Rate
- Programmable Frame Rate (60,75,90,105,120)Hz
Frame Rate
- Programmable Frame Rate (60,75,90,105,120)Hz
Internal regulator for row driver
- Selectable Voltage Function. ( VCC_R = 0.8*VCC_C or 0.7*VCC_C : 2-step )
LD7038
Power Supply
- VDD : 1.65 ~ 3.3V
- VCC_C : 8.0 ~ 18.0V for Column
- VCC_R : 8.0 ~ 18.0V for Row
Display Area
- Max 128 x 128 Line
Graphics RAM
- Dot matrix : 128 x 4 Bit x 128 = 65,536 Bit
Column Driver
- Max 128 Outputs
- 16Gray
- Maximum Output Current = 255 uA (1 uA Step)
- Next Pin to Pin Current Deviation ±2.0 (Iout = 50uA)
- Current Deviation at 1Chip Max-Min ±4.0 % (Iout = 50uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 50uA)
- 5 Times Peak boot Current Driving
Row Driver
- Max 128 Outputs
- Variable duty ratio (1 to 128)
- ON resistance typical 25ohm
CPU Interface
- 8080 or 6800 series parallel interface
- Serial Peripheral Interface
- I2C Serial Interface
Oscillator
- On-chip RC oscillator
Frame Rate
- Variable Frame Rate (60,75,90,105,120)Hz
Internal regulator for row driver
- Selectable Voltage Function. ( 0.85*VCC_C ~ 0.65*VCC_C )
LD7040
Power Supply
- VDD : 1.65 ~ 3.3V
- VCC_C : 8.0 ~ 15.0V for Column
- VCC_R : 8.0 ~ 15.0V for Row
Display Area
- Max 128 x 64 Line
Graphics RAM
- Dot matrix : 128 x 1 Bit x 64 = 8192 Bit
Column Driver
- Max 128 Outputs
- Mono
- Maximum Output Current = 255 uA (1 uA Step)
- Next Pin to Pin Current Deviation ±2.0 (Iout = 50uA)
- Current Deviation at 1Chip Max-Min ±4.0 % (Iout = 50uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 50uA)
- 5 Times Peak boot Current Driving
Row Driver
- Max 64 Outputs
- Variable duty ratio (1 to 64)
- ON resistance typical 25ohm
CPU Interface
- 8080 or 6800 series parallel interface
- Serial Peripheral Interface
- I2C Serial Interface
Screen Saver
- Screen Saver Function.
Oscillator
- On-chip RC oscillator
Frame Rate
- Variable Frame Rate (60,75,90,105,120)Hz
Crosstalk
- Crosstalk enhancement function
Internal regulator for row driver
- Selectable Voltage Function. ( 0.8*VCC_C or 0.7*VCC_C )
LD7044
Power Supply
- VDD : 1.65 ~ 3.5V Interface Power, Logic and Analog Power
- VAH : 8.0 ~ 16.0V for Anode
- VKH : 8.0 ~ 16.0V for Cathode
Display Area
- Max 96 x 8Line
Graphics RAM
- Dot matrix :96 x 8bit x 8 =6,144Bit
AnodeDriver
- Max 96Outputs
- MaximumDataOutput Current = 306uA (1.2uA Step)
- Next Pin to Pin Current Deviation ±2% (Iout = 100uA)
- Current Deviation at 1Chip Max-Min ±4%(Iout = 100uA)
- Average Current Deviation against absolute level ±6.0%(Iout = 100uA)
Cathode Driver
- Max 8Outputs
- ON resistance typical 20Ω
CPU Interface
- Serial Peripheral Interface, I2C Interface
On-chip Oscillator
- Internal RC Oscillation
Driving Method
- PWM (Gray Level is controlled by Pulse Width)
LD7134
Power Supply
- VCC_C = 8 ~ 18V
- VDD = 1.65 ~ 3.3V
Display Area
- Max. 96(RGB) x 96 (Pixel) for 65K Color
Graphics RAM
- Dot matrix : 96x16 Bitx96=147,456 Bit
Column Driver
- Max 96(RGB) Outputs
- 65K Color
- Maximum Output Current = 255uA (1uA Step), Maximum Peak Current = 1008uA (16 Step)
- Next Pin to Pin Current Deviation±2.0% (Iout = 100uA)
- Current Deviation at 1Chip Max-Min ±4.0% (Iout = 100uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 100uA)
Row Driver
- Max. 96 Outputs
- Variable duty ratio (1 to 96)
- ON resistance typical 25ohm (Max. 40ohm)
CPU Interface
8bit Write and Read
- Address A0 is used to select command and parameter (data)
- Selectable 68/80 series parallel bus or serial interface
- Parallel I/F : write cycle 10MHz
- read cycle 2MHz
- Serial I/F : serial clock 10MHz when write mode,
- serial clock 2MHz when read mode
Advanced Display Features
- Adjustable Frame Frequency (60Hz ~ 120Hz).
- Internal Regulator for Row Driver.
- Color Mode & Gray Mode (288 x 96 Resolution)
- Oscillator & Reference resistor is internal.
LD7138
Power Supply
- VCC_C = 8 ~ 18V
- VDD = 1.65 ~ 3.3V
Display Area
- Max. 128(RGB) x 128 (Pixel) for 65K Color
Graphics RAM
- Dot matrix : 128x16 Bitx128=262,144 Bit
Column Driver
- Max 128(RGB) Outputs
- 65K Color
- Maximum Output Current = 255uA (1uA Step), Maximum Peak Current = 1008uA (16 Step)
- Next Pin to Pin Current Deviation±2.0% (Iout = 100uA)
- Current Deviation at 1Chip Max-Min ±4.0% (Iout = 100uA)
- Average Current Deviation against absolute level ±6.0% (Iout = 100uA)
Row Driver
- Max. 128 Outputs
- Variable duty ratio (1 to 128)
- ON resistance typical 25ohm (Max. 40ohm)
CPU Interface
8bit Write and Read
- Address A0 is used to select command and parameter (data)
- Selectable 68/80 series parallel bus or serial interface
- Parallel I/F : write cycle 10MHz
- read cycle 2MHz
- Serial I/F : serial clock 10MHz when write mode,
- serial clock 2MHz when read mode
Advanced Display Features
- Adjustable Frame Frequency (60Hz ~ 120Hz).
- Internal Regulator for Row Driver.
- Oscillator & Reference resistor is internal.
Detailed specification sheets are shown in the product images.

