Power Generation Boiler
A soot blower is system that effectively removes ashes or other attachments piled on the surface in contact with combustible gas such as boilers, fired heaters and other heat exchange devices.
Use of soot blowing contributes to enhancing heat efficiency and increasing the rate of facility operations. Soot blowers are needed by such facilities as power plant boilers, urban and industrial waste management facilities, fire heaters, denitrification facilities and desulfurization facilities.
LR Series
Long Retractable Soot Blower
Designed to operate perfectly under High temperature gas path of boilers and other facilities. It is widely used at boilers and other heat exchangers.
- Make forward and backward movement of lance tube with 1 motor.
- Maximize blowing efficiency by applying high efficiency ventri nozzles.
- Low noise operation with an enclosed reducer and carriage
- Lance tube selects proper materials for installation and operation conditions.
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common use.
RB – 1
Rotary Soot Blower
Element tube has to be installed in gas path at all times because gas temperatures of boilers and other facilities are low.
(Ex. :Evaporator tube, economizer, tubular air, pre heater, fired heater, etc.)
Element tube is made by proper materials at gas zone temperature and have lots of nozzles clean the whole gas path depending on arrangement of boiler tube.
A single motor enable the element tube to rotate.
It also operates the cam parts and is feasible to open and close of poppet valve.
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common.
WB - 1
Wall Blower
It is for furnace wall cleaning of boiler and specially it is used at pulverized coal combustion boiler.
It is attached to the outside of furnace wall and lance tube is located at backward position.Thus, it is designed to prevent from damage of high temperature at combustor.
Once it operates, lance tube moves to forward position and starts rotation.
And then blowing starts when poppet valve is operated by cam.
- Make forward and backward movement of lance tube with 1 motor.
- Maximize blowing efficiency by applying high efficiency ventri nozzles.
- Nozzle head and nozzle are made by heatresisting alloy in order to bear up against high temperature.
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common use.
SR – 2B
Short Retractable Soot Blower
It is installed at safe section even if some section of lance tube is located in gas path at normal times.
This is because gas temperature of boiler and other facility is low.
It is widely used when they need to more powerful blowing than Rotary type soot blower. (Ex.: Economizer, tubular air, preheater, etc.)
It is basically same structure of LR-2B and nozzle arrayed as equidistant intervals at the plural sections and thus it is able to clean the whole sections of gas path with short transfer distance.
In case that sections are two , it is called half retractable.
Sections will be designed a lot if needed.
- Make forward and backward movement of lance tube with 1 motor.
- Maximize blowing efficiency by applying high efficiency ventri nozzles.
- Lance tube selects proper materials for installation and operation conditions.
- Low noise operation with an enclosed reducer and carriage
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common use.
PLR – AH
Air Preheater Soot Blower
It is cleaning equipment of Regenerative air heater and it is generally known as part retractable type.
Multi nozzle is installed at lance tube and it becomes strong soot blowing.
- Maximize construct stiffness with strong fame of box type.
- Minimize the movement silence and shake by Dual rack and pinion drive.
- Blowing that make forward and backward movement of lance tube with 1 motor.
- Maximize blowing efficiency by applying high efficiency ventri nozzles.
- Low noise operation with an enclosed reducer and carriage.
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common use.
Detailed specification sheets are shown in the product images.
Power Generation Boiler
Power Generation Boiler: overview and buying guide
The Power Generation Boiler is made by DAEOUNG MACHINERY and listed in our machine tools range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.
Frequently asked questions
How much does the Power Generation Boiler cost?
Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.
Can you ship the Power Generation Boiler to my country?
Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.
Is this a genuine DAEOUNG MACHINERY product?
We purchase directly from DAEOUNG MACHINERY or its authorised channels and confirm the model and specifications with the manufacturer before ordering.
What is the minimum order quantity?
For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.
A soot blower is system that effectively removes ashes or other attachments piled on the surface in contact with combustible gas such as boilers, fired heaters and other heat exchange devices.
Use of soot blowing contributes to enhancing heat efficiency and increasing the rate of facility operations. Soot blowers are needed by such facilities as power plant boilers, urban and industrial waste management facilities, fire heaters, denitrification facilities and desulfurization facilities.
LR Series
Long Retractable Soot Blower
Designed to operate perfectly under High temperature gas path of boilers and other facilities. It is widely used at boilers and other heat exchangers.
- Make forward and backward movement of lance tube with 1 motor.
- Maximize blowing efficiency by applying high efficiency ventri nozzles.
- Low noise operation with an enclosed reducer and carriage
- Lance tube selects proper materials for installation and operation conditions.
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common use.
RB – 1
Rotary Soot Blower
Element tube has to be installed in gas path at all times because gas temperatures of boilers and other facilities are low.
(Ex. :Evaporator tube, economizer, tubular air, pre heater, fired heater, etc.)
Element tube is made by proper materials at gas zone temperature and have lots of nozzles clean the whole gas path depending on arrangement of boiler tube.
A single motor enable the element tube to rotate.
It also operates the cam parts and is feasible to open and close of poppet valve.
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common.
WB - 1
Wall Blower
It is for furnace wall cleaning of boiler and specially it is used at pulverized coal combustion boiler.
It is attached to the outside of furnace wall and lance tube is located at backward position.Thus, it is designed to prevent from damage of high temperature at combustor.
Once it operates, lance tube moves to forward position and starts rotation.
And then blowing starts when poppet valve is operated by cam.
- Make forward and backward movement of lance tube with 1 motor.
- Maximize blowing efficiency by applying high efficiency ventri nozzles.
- Nozzle head and nozzle are made by heatresisting alloy in order to bear up against high temperature.
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common use.
SR – 2B
Short Retractable Soot Blower
It is installed at safe section even if some section of lance tube is located in gas path at normal times.
This is because gas temperature of boiler and other facility is low.
It is widely used when they need to more powerful blowing than Rotary type soot blower. (Ex.: Economizer, tubular air, preheater, etc.)
It is basically same structure of LR-2B and nozzle arrayed as equidistant intervals at the plural sections and thus it is able to clean the whole sections of gas path with short transfer distance.
In case that sections are two , it is called half retractable.
Sections will be designed a lot if needed.
- Make forward and backward movement of lance tube with 1 motor.
- Maximize blowing efficiency by applying high efficiency ventri nozzles.
- Lance tube selects proper materials for installation and operation conditions.
- Low noise operation with an enclosed reducer and carriage
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common use.
PLR – AH
Air Preheater Soot Blower
It is cleaning equipment of Regenerative air heater and it is generally known as part retractable type.
Multi nozzle is installed at lance tube and it becomes strong soot blowing.
- Maximize construct stiffness with strong fame of box type.
- Minimize the movement silence and shake by Dual rack and pinion drive.
- Blowing that make forward and backward movement of lance tube with 1 motor.
- Maximize blowing efficiency by applying high efficiency ventri nozzles.
- Low noise operation with an enclosed reducer and carriage.
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common use.
Detailed specification sheets are shown in the product images.




















