Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
New
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities
Denitrification Facilities

Denitrification Facilities

A soot blower is system that effectively removes ashes or other attachments piled on the surface in contact with combustible gas such as boilers, fired heaters and other heat exchange devices.
Use of soot blowing contributes to enhancing heat efficiency and increasing the rate of facility operations. Soot blowers are needed by such facilities as power plant boilers, urban and industrial waste management facilities, fire heaters, denitrification facilities and desulfurization facilities.

SR – 2B

Short Retractable Soot Blower

It is installed at safe section even if some section of lance tube is located in gas path at normal times.
This is because gas temperature of boiler and other facility is low.
It is widely used when they need to more powerful blowing than Rotary type soot blower. (Ex.: Economizer, tubular air, preheater, etc.)
It is basically same structure of LR-2B and nozzle arrayed as equidistant intervals at the plural sections and thus it is able to clean the whole sections of gas path with short transfer distance.
In case that sections are two , it is called half retractable.
Sections will be designed a lot if needed.

- Make forward and backward movement of lance tube with 1 motor.

- Maximize blowing efficiency by applying high efficiency ventri nozzles.

- Lance tube selects proper materials for installation and operation conditions.

- Low noise operation with an enclosed reducer and carriage

- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.

- It is convenient for maintenance because each model of poppet valve is in common use.

PLR – RAKE

Rake Type Soot Blower

It is efficient design to clean at large area with even and strong.
Plural rake arms are attached to retractable type lance tube and each arm is attached to multiple nozzles evenly.
(Applicable facilities are SCR, tubular air heater)

- Maximize construct stiffness with strong fame of box type.

- Minimize the movement silence and shake by Dual rack and pinion drive.

- Blowing that make forward and backward movement of lance tube with 1 motor.

- Maximize blowing efficiency by applying high efficiency ventri nozzles.

- Low noise operation with an enclosed reducer and carriage.

- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.

- It is convenient for maintenance because each model of poppet valve is in common use.

Detailed specification sheets are shown in the product images.

Error product group when enable variant picker

Availability: In stock
Denitrification Facilities

Denitrification Facilities

$0.00

Denitrification Facilities: overview and buying guide

The Denitrification Facilities is made by DAEOUNG MACHINERY and listed in our machine tools range. Premium Emart sources it directly from the manufacturer and handles the quotation, inspection, export packing and international shipping, so you can buy it from anywhere in the world with a single point of contact.

Frequently asked questions

How much does the Denitrification Facilities cost?

Prices depend on the configuration, quantity and destination. Add the item to your RFQ list and we will send a free quotation with the unit price, lead time and shipping cost. There is no obligation to buy.

Can you ship the Denitrification Facilities to my country?

Yes. We export worldwide by sea, air or courier, with export packing and the commercial invoice, packing list and certificate of origin where required. The shipping options are shown in your quotation.

Is this a genuine DAEOUNG MACHINERY product?

We purchase directly from DAEOUNG MACHINERY or its authorised channels and confirm the model and specifications with the manufacturer before ordering.

What is the minimum order quantity?

For most items the minimum order is one unit. If the manufacturer sets a higher minimum, we tell you in the quotation.

A soot blower is system that effectively removes ashes or other attachments piled on the surface in contact with combustible gas such as boilers, fired heaters and other heat exchange devices.
Use of soot blowing contributes to enhancing heat efficiency and increasing the rate of facility operations. Soot blowers are needed by such facilities as power plant boilers, urban and industrial waste management facilities, fire heaters, denitrification facilities and desulfurization facilities.

SR – 2B

Short Retractable Soot Blower

It is installed at safe section even if some section of lance tube is located in gas path at normal times.
This is because gas temperature of boiler and other facility is low.
It is widely used when they need to more powerful blowing than Rotary type soot blower. (Ex.: Economizer, tubular air, preheater, etc.)
It is basically same structure of LR-2B and nozzle arrayed as equidistant intervals at the plural sections and thus it is able to clean the whole sections of gas path with short transfer distance.
In case that sections are two , it is called half retractable.
Sections will be designed a lot if needed.

- Make forward and backward movement of lance tube with 1 motor.

- Maximize blowing efficiency by applying high efficiency ventri nozzles.

- Lance tube selects proper materials for installation and operation conditions.

- Low noise operation with an enclosed reducer and carriage

- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.

- It is convenient for maintenance because each model of poppet valve is in common use.

PLR – RAKE

Rake Type Soot Blower

It is efficient design to clean at large area with even and strong.
Plural rake arms are attached to retractable type lance tube and each arm is attached to multiple nozzles evenly.
(Applicable facilities are SCR, tubular air heater)

- Maximize construct stiffness with strong fame of box type.

- Minimize the movement silence and shake by Dual rack and pinion drive.

- Blowing that make forward and backward movement of lance tube with 1 motor.

- Maximize blowing efficiency by applying high efficiency ventri nozzles.

- Low noise operation with an enclosed reducer and carriage.

- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.

- It is convenient for maintenance because each model of poppet valve is in common use.

Detailed specification sheets are shown in the product images.